User's Manual

Chapter 7 Home Networking 91
7.7 The File Sharing Screen
You can share files on a USB memory stick or hard drive connected to your Device with users on
your network.
Router Preference Select the router preference (Low, Medium or High) for the Device. The Device sends
this preference in the router advertisements to tell hosts what preference they
should use for the Device. This helps hosts to choose their default router especially
when there are multiple IPv6 router in the network.
Note: Make sure the hosts also support router preference to make this function
work.
Reachable Time
(ms)
Enter the time in milliseconds that can elapse before a neighbor is detected. Possible
values for this field are 0-3600000.
Retrans Timer (ms) Enter the time in milliseconds between neighbor solicitation packet retransmissions.
Possible values for this field are 1000-4294967295.
RA Interval Enter the time in seconds between router advertisement messages. Possible values
for this field are 4-1800.
Delegate MTU from
WAN
Select this to have the Device obtain the MTU setting from the service provider or
uplink router.
Manual Select this to specify the MTU manually.
MTU The Maximum Transmission Unit. Type the maximum size of each IPv6 data packet,
in bytes, that can move through this interface. If a larger packet arrives, the Device
divides it into smaller fragments.
DAD attempts Specify the number of DAD (Duplicate Address Detection) attempts before an IPv6
address is assigned to the Device LAN interface. Possible values for this field are 1-7.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Advanced Setup Click this to close the IPv6 LAN Setup Advanced Setup section.
Table 30 Network Setting > Home Networking > IPv6 LAN Setup (continued)
LABEL DESCRIPTION