User's Manual

Chapter 20 Wireless 157
20.8 Wireless 5GHz WPS
Click Wireless 5GHz > WPS to open the WPS screen. Enabling Wi-Fi Protected Setup (WPS) lets you
add new WPS-compatible devices to the wireless network with ease.
DTIM Delivery Traffic Indication Message (DTIM) is the time period after which broadcast and
multicast packets are transmitted to mobile clients in the Power Saving mode. A high
DTIM value can cause clients to lose connectivity with
the network. This value can be set from 1 to 100.
Beamforming Select this option to have the Router focus the wireless signal and aim it directly at the
wireless clients. Clear this option to disable beamforming. You may need to do this if
beamforming causes issues with IEEE 802.11 N, G, or B devices.
Short GI Select this option to set the Router to use a reduced guard interval. This increases
throughput at the cost of an increased error rate in certain network environments with
greater radio interference.
SCS Select this to have the Router automatically determine and select the most suitable
wireless channel.
Apply/Save Click this to save your changes back to the Router.
Table 91 Wireless 5GHz Advanced (continued)
LABEL DESCRIPTION