User's Manual

Chapter 20 Wireless 158
Figure 99 Wi
reless 5GHz WPS
Table 92 Wireless 5GHz WPS
LABEL DESCRIPTION
Enable WPS Use WiFi Protected Setup (WPS) to quickly set up
a wireless network without having to
manually configure settings. Set up each WPS connection between two devices at a
time.
Add Client Use this section to add a wireless client to the wireless network.
Select Us
e STA PIN to add a client by entering the client’s Personal Identification
Number (PIN) in the field that displays when you select this option.
Select Use A
P PIN to add a client by entering the AP’s PIN from the Device PIN field in
the client’s WPS configuration.
Add Enrollee Click this to use WPS to add a wireless client t
o your wireless network.
Note: You must also activate WPS on the client within two minutes.
Release AP Lock Click this to unlock the Router’s AP function if WPS locked it due to unauthorized
wireless access attempts.
Set Authorized
Sta
tion MAC
If you select Enter STA PIN as your method to add a client, you may enter the MAC
address of an authorized wireless client here.