User's Manual

Chapter 21 Voice 169
Enable
Unconditional
Forward
Select this if you want the Router to forward all incoming calls to the specified
phone number.
Specify the phone number in the To Number field on the right.
Enable Busy
Forward
Select this if you want the Router to forward incoming calls to the specified phone
number if the phone port is busy.
Specify the phone number in the To Number field on the right.
If you have call waiting, the incoming call is forwarded to the specified phone
number if you reject or ignore the second incoming call.
Enable No
Answer Forward
Select this if you want the Router to forward incoming calls to the specified phone
number if the call is unanswered. (See No Answer Time.)
Specify the phone number in the To Number field on the right.
No Answer Time This field is used by the Active No Answer Forward feature.
Enter the number of seconds the Router should wait for you to answer an
incoming call before it considers the call is unanswered.
Enable Do Not
Disturb
Select this to set your phone to not ring when someone calls you.
MWI (Message
Waiting
Indication)
Select this if you want to hear a waiting (beeping) dial tone on your phone when
you have at least one voice message. Your VoIP service provider must support this
feature.
Expiration Time Keep the default value for this field, unless your VoIP service provider tells you to
change it. Enter the number of seconds the SIP server should provide the
message waiting service each time the Router subscribes to the service. Before
this time passes, the Router automatically subscribes again.
Hot Line / Warm
Line Enable
Select this to enable the hot line or warm line feature on the Router.
Warm Line Select this to have the Router dial the specified warm line number after you pick
up the telephone and do not press any keys on the keypad for a period of time.
Hot Line Select this to have the Router dial the specified hot line number immediately
when you pick up the telephone.
Hot Line / Warm
Line number
Enter the number of the hot line or warm line that you want the Router to dial.
Warm Line Timer Enter a number of seconds that the Router waits before dialing the warm line
number if you pick up the telephone and do not press any keys on the keypad.
Apply Click this to save your changes and to apply them to the Router.
Cancel Click this to set every field in this screen to its last-saved value.
Table 97 SIP Account (continued)
LABEL DESCRIPTION