User's Manual

Chapter 21 Voice 195
USA Three-Way Conference
Use the following steps to make three-way conference calls.
1 W
hen you are on the phone talking to someone (party A), press the flash key to put the caller on
hold and get a dial tone.
2 D
ial a phone number directly to make another call (to party B).
3 W
hen party B answers the second call, press the flash key to create a three-way conversation.
4 Hang
up the phone to drop the connection.
5 If you
want to separate the activated three-way conference into two individual connections (with
party A on-line and party B on hold), press the flash key.
6 If
you want to go back to the three-way conversation, press the flash key again.
7 If you
want to separate the activated three-way conference into two individual connections again,
press the flash key. This time the party B is on-line and party A is on hold.
21.8.2.4 Phone Functions Summary
The following table shows the key combinations you can enter on your phone’s keypad to use
certain features.
Table 109 Phone Functions Summary
ACTION FUNCTION DESCRIPTION
*98# Call transfer Transfer a call to another phone. See Section 21.8.2.2 on page
192 (Europe type) and Section 21.8.2.3 on page 194 (USA type).
*66# Call return Place a call to the last person who called you.
*95# Enable Do Not Disturb Use these to set your phone not to
ring when someone calls you,
or to turn this function off.
#95# Disable Do Not Disturb
*41# Enable Call Waiting Use these to allow you to put a call on hold when you are
answering ano
ther, or to turn this function off.
#41# Disable Call Waiting
**** IVR Use these to set up Interactive Voice Response (IVR). IVR allows
you to r
ecord custom caller ringing tones (the sound a caller
hears before you pick up the phone) and on hold tones (the
sound someone hears when you put their call on hold).
#### Internal Call Call the phone(s) connected to the Router.
*82 One Shot Caller Display Call Activate or deactivate caller ID for the next call only.
*67 One Shot Caller Hidden Call