User's Manual

Chapter 23 Settings 201
23.3 Restoring Factory Defaults
Click Management > Settings > Restore Default to open the following screen.
Figure 123 Ma
nagement > Settings > Restore Default
Click Restore Default Settings to clear all user-entered configuration information and return the
Router to its factory defaults.
You can also press the RESET
button on the rear panel to reset the factory defaults of your Router.
You may need to change the IP address of your computer to be in the same subnet as that of the
d
efault Router IP address (192.168.1.1). See the appendix for details on how to set up your
computer’s IP address.