User's Manual

Chapter 26 TR-069 Client 211
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration
server.
ACS Password Enter the TR-069 password for authentication with the auto-configuration
server.
WAN Interface used
by TR-069 client
Select a WAN interface through which the TR-069 traffic passes.
If you select Any_WAN, you should also select the pre-configured WAN
connection(s).
Display SOAP
messages on serial
console
Select Enable to show the SOAP messages on the console.
Connection Request
Authentication
Select this option to enable authentication when there is a connection request
from the ACS.
Connection Request
User Name
Enter the connection request user name. When the ACS makes a connection
request to the Router, this user name is used to authenticate the ACS.
Connection Request
Password
Enter the connection request password. When the ACS makes a connection
request to the Router, this password is used to authenticate the ACS.
Connection Request
URL
This shows the connection request URL. The ACS can use this URL to make a
connection request to the Router.
Apply/Save Click this button to save your changes.
GetRPCMethods In TR-069, a Remote Procedure Call (RPC) mechanism is used for bidirectional
communication between a CPE and the auto-configuration server. The RPC
method is used to initiate the transfer (download or upload) between them.
Click this button to discover the method supported by the ACS, such as Inform,
TransferComplete or RequestDownload.
Table 117 TR-069 Client (continued)
LABEL DESCRIPTION