User's Manual

Chapter 2 Device Info 21
2.4 WAN Statistics
Click Device Info > Statistics > WAN Service to display the total, multicast, unicast, and broadcast
traffic statistics counters for the Router’s WAN interfaces. Use the button to clear the counters.
Figure 8
WAN Statistics
Table 6 WAN Statistics
LABEL DESCRIPTION
Interface This shows the name of the WAN interface used by this connection.
veip0 stands for a virtual Ethernet card and is the foundation for veip0/* which are
virtual WAN interfaces of the physical GPON line. The ppp0.* indicates a PPP
connection.
eth0 ~ eth3 r
epresent the Ethernet LAN ports 1 ~ 4 and are the foundation for eth0/*
which are virtual WAN interfaces of the physical Gigabit Ethernet line.
The number after the dot (.) r
epresents the VLAN ID number assigned to traffic sent
through this connection. The number after the underscore (_) represents the index
number of connections through the same interface.
(null) means the entry is no
t valid.
Description This is the service name of this connection.
Received
Bytes This indicates the number of bytes received on this interface.
Pkts This indicates the number of packets received on this interface.
Errs This indicates the number of frames with
errors received on this interface.
Drops This indicates the number of received packets dropped on this interface.
Transmitted
Bytes This indicates the number of bytes transmitted on this interface.
Pkts This indicates the number of transmitted packets on this interface.
Errs This indicates the number of frames with
errors transmitted on this interface.