User's Manual

Chapter 2 Device Info 22
2.5 Route Info
Click Device Info > Route to display the Router’s IPv4 and IPv6 routing tables.
Figure 9
Route Info
Table 7 Route Info
LABEL DESCRIPTION
Destination This displays the IP address to which this entry applies.
Gateway This displays the gateway the Router uses to send tr
affic to the entry’s destination
address.
Subnet Mask This displays the subnet mask of the destination net.
Flag This displays whether the route is up (U), t
he Router drops packets for this destination
(!), the route uses a gateway (G), the target is in the neighbor cache (C), the target is a
host (H), reinstate route for dynamic routing (R), the route was dynamically installed by
redirect (D), or modified from redirect (M).
Metric The metric represents the “cost” of transmission for routing purposes. IP routing uses
hop count as the measurement of cost, with a minimum of 1 for directly-connected
networks.
Service The name of a specific service to which the route applies if one is specified.
Interface The interface through which this route sends traffic.
Drops This indicates the number of outgoing packets dropped on this interface.
Reset Click this to clear the screen’s statistics counters.
Table 6 WAN Statistics (continued)
LABEL DESCRIPTION