User's Manual

Chapter 3 WAN 27
The following table describes the fields in this screen.
Table 12 ETH
Interface
LABEL DESCRIPTION
Interface/(Name) The name of a configured layer-2 interface. eth
0 ~ eth3 represent the ethernet LAN
ports 1 ~ 4.
Connection Mode This shows the connection mode of the layer-2 interface.
Remove Select an interface and click the Remo
ve button to delete it. You cannot remove a
layer-2 interface when a WAN service is associated with it.
Add Click this button to create a new layer-2 interface. Y
ou can only have one ETH layer 2
interface at a time.
3.2.1 Ethernet Layer-2 Interface Configuration
Click the Add button in the Layer2 Interface: ETH Interface screen to open the following screen.
Use this screen to create a new layer-2 interface.
Figure 15 ETH Interfa
ce Configuration
The following table describes the fields in this screen.
Table 13 ETH Interface
Configuration
LABEL DESCRIPTION
Select a ETH port Select an Ethernet port. eth
0 ~ eth3 represent the ethernet LAN ports 1 ~ 4.
Back Click this button to return to the previous scr
een without saving any changes.
Apply/Save Click this button to save your changes and go back
to the previous screen.
3.3 WAN Service
Use this screen to change your Router’s WAN settings. Click Advanced Setup > WAN Service. The
summary table shows you the configured WAN services (connections) on the Router.