User's Manual

Chapter 3 WAN 45
3.3.1.7 Configuration Summary
This read-only screen shows the current WAN connection settings.
Figure 24 W
AN Configuration: Configuration Summary
Table 22 WAN Configuration: Configuration Summary
LABEL DESCRIPTION
Connection Type This is the encapsulation method used by this connection.
NAT This shows whether NAT is active or not for this connection.
Full Cone NAT This shows whether full cone NAT is active or no
t for this connection.
IGMP Multicast
Pr
oxy
This shows whether IGMP proxy is activated or not for this connection.
IGMP is not available when the connection uses the bridging service.
IGMP Multicast
Sour
ce Enabled
This shows whether IGMP source enable is activated or not for this
connection. IGMP source enable has the Router add routing table entries
based on the IGMP traffic.
MLD Multicast
Pr
oxy
This shows whether MLD proxy is activated or not for this connection. MLD
is not available when the connection uses the bridging service.
MLD Multicast
Sour
ce Enabled
This shows whether MLD source enable is activated or not for this
connection. MLD source enable has the Router add routing table entries
based on the MLD traffic.
Quality Of Service This shows whether QoS is active or not for this connection.
Back Click this button to r
eturn to the previous screen.
Apply/Save Click this button to save your changes.