User's Manual

Chapter 4 LAN 55
Network Connections: My Network Places: Properties: Example
Statically
Configure
Select this to send a fixed LAN IPv6 address prefix.
Prefix: enter the IPv6 prefix and length the Router uses to generate the LAN
IPv6 address. The prefix length specifies how many most significant bits (starting
from the left) in the address compose the network address. This field displays
the bit number of the IPv6 subnet mask.
Preferred Life Time (hour): enter the preferred lifetime for the prefix. -1 means
no time limit.
Valid Life Time (hour): enter the valid lifetime for the prefix. Set this greater
than or equal to the preferred life time. -1 means no time limit.
Enable MLD Snooping Select this to have the Router check Multicast Listener Discovery (MLD) packets
to learn the multicast group membership. This helps reduce multicast traffic.
Standard Mode Select this to have the Router forward multicast packets to a port that joins the
multicast group and broadcast unknown multicast packets from the WAN to all
LAN ports.
Blocking Mode Select this to have the Router block all unknown multicast packets from the
WAN.
Enable MLD LAN to
LAN Multicast
Select this to allow MLD multicast traffic to travel between the LAN ports.
Save/Apply Click this button to save your changes.
Table 27 IPv6 LAN Auto Configuration (continued)
LABEL DESCRIPTION