User's Manual

Chapter 5 VPN 58
MPPE Stateful? Select Yes to enable stateful MPPE encryption. This can increase
performance over stateless MPPE, but should not be used in lossy network
environments like layer two tunnels over the Internet.
User Name Enter the user name for connecting to the L2TP server.
Password Enter the password for connecting to the L2TP server.
Retype Retype the password for connecting to the L2TP server.
Get IP
automatically
Select Yes to have the L2TP server assign a local IP address to the client.
Assign IP
Address
Enter the IP address for the client. Ensure that the IP address is configured to
be allowed on the L2TP server.
Idle Timeout Enter the time in minutes to timeout L2TP connections.
Table 29 L2TP Client: Add (continued)
LABEL DESCRIPTION