User's Manual

Table 34 Port Triggering
LABEL DESCRIPTION
Add Click this to create a new rule.
Remove Select entries and click the Remo
ve button to delete them.
# This is the index number of the entry.
Status This field displays whether the port triggering rule is active or
not. A yellow bulb
signifies that this rule is active. A gray bulb signifies that this rule is not active.
Application
Name
This field displays the name of the service used by this rule.
Trigger
Pr
otocol
This is the trigger transport layer protocol.
Trigger Port
Range Start
The trigger port is a port (or a range of ports) that causes (or triggers) the Router to
record the IP address of the LAN computer that sent the traffic to a server on the WAN.
This is the first port number that identifies a service.
Trigger Port
Range End
This is the last port number that identifies a service.
Open
Protocol
This is the open transport layer protocol.
Open Port
Range Start
The open port is a port (or a range of ports) that a
server on the WAN uses when it sends
out a particular service. The Router forwards the traffic with this port (or range of ports)
to the client computer on the LAN that requested the service.
This is the first port number that identifies a service.
Open Port
Range End
This is the last port number that identifies a service.
WAN Interface This field shows the WAN interface thr
ough which the service is forwarded.
Chapter 6 Network Address Translation (NAT) 67