User's Manual

Chapter 6 Network Address Translation (NAT) 68
6.2.1 Add Port Triggering Rule
This screen lets you create new port triggering rules. Click Add in the Port Triggering screen to
open the following screen.
Figure 38 Po
rt Triggering: Add
Table 35 Port T
riggering: Add
LABEL DESCRIPTION
User Interface Select a WAN interface for which you want to config
ure port triggering rules.
Application
Name
Choose an application from the drop-down list or select Custom appli
cation and enter
a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
Save/Apply Click this button to save your changes.
Trigger Port
Sta
rt
The trigger port is a port (or a range of ports) that causes (or triggers) the Router to
record the IP address of the LAN computer that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port numbers.