User's Manual

Chapter 10 Routing 95
Use the Pol
icy Routing screen to view and configure routing policies on the Router. Click Advanced
Setup > Routing > Policy Routing to open the following screen.
Figure 59 P
olicy Routing
Table 55 Policy Rou
ting
LABEL DESCRIPTION
Policy Name This displays the name of the rule.
Source IP This displays the source IP address.
LAN Port This displays the source LAN port number.
WAN This displays the WAN interface through which the traffic is routed.
Default GW This displays the default gateway IP address the route uses.
Remove Select entries and click the Remo
ve button to delete them.
Add Click this to create a new policy routing rule.