User's Manual

无锡人人行拍网络科技有限公司
1
1. Easy way to start the device
1.1 Operating steps and instructions
1.1.1Transmitter
 Install the antennas.
 Install the camera.
 Connect transmitter to the power.
There should be below instructions if the transmitter works well.
After 15 seconds of power on, the WORK light will display the breathing effect, and the WORK light will
loop from on to off on display.
CAM light turn-on.
LINK light turn-on if the transmitterconnect to receiver.
The Transmitter is Module,is use for outdoor,not a portable device.