Specifications

4.2.14
电池接触弹力
Battery contact
stretch
将负极弹簧压缩至最小尺寸电池所能压
缩到的高度时测试弹簧回弹力。
Tested the spring back elasticity
when the negative spring is
compressed to a minimum size
battery.
回弹力不应小于 3N。
The rebound power should
not be less than 3 N.
4.2.15
电池安装
Battery
installation
依下图试安装最大及最小尺寸的遥控器
Depending on the picture to
install the maximum and minimum
size remote control
电池应能顺利安装
Battery should be
installed smoothly
4.2.16
跌落测试
Fall test
将装电池的遥控器，从 100cm 的高度，自由
跌落 6 个面 4 个角在不小于 3cm 厚的木质
地板上。
The remote control of the battery
will be free from the height of
100 cm, and 4 angles freely
dropped 4 angles in a wooden floor
of not less than 3 cm thick.
卡钩跌开但是能够安装回去遥
控器能正常工作视为通过。，检
查外观与功能应无异常。
The hook has fallen, but
it can be installed back
to the remote control.
Check the appearance and
function should have no
abnormalities.
4.2.17
包装振动测试
Packaging
vibration test
将完好包装的整箱遥控器放置于振动测
试台上，以 10HZ-30HZ-10HZ 的频率，
以 1.5mm 的振幅做振动测试，振动方
向：垂直，实验时间 2H。
Place a completely packaged full
box of remote control on the
vibration test bench, vibration
test at a frequency of 1.5 mm,
vibration direction: vertical,
experimental time 2 h.
测试后的遥控器不可有功能失
效
Remote control after
testing does not have
functional failure
推力