Specifications

4.3.5
盐雾测试
Salt spray test
温度：+35°C ± 2°C
湿度：85% RH
密度：1.030 and 1.040
水平面收集的量：2 ± 1 ml/h /80cm²
NaCl 浓度：5%
Ph= 6.5～7.2
持续时间：24 小时
干燥时间：24 小时
Temperature: + 35 ° C ± 2 ° C
Humidity: 85% RH
Density: 1.030 and 1.040
Water level collection: 2 ± 1 ml
/ h / 80cm2
NaCl concentration: 5%
PH = 6.5 ~ 7.2
Duration: 24 hours
Drying time: 24 hours
所有金属器件没有锈蚀,切口可以有
锈蚀
All metal devices have no
rust, and the incision can
be rusted.
4.3.6
包装运输试验：跌
落试验
Packaging and
transportation
test: drop test
将整箱产品从 60cm 高度跌落到地面，
对其中三个轴向， 1 边和 1 个角进行试
验
如下图：
Test the full box of products
from 60 cm to the ground, test
three axial, 1 sides and 1 angle
As shown below:
4.3.7
包装要求
Packaging
requirements
遥控器的 PE 袋必须符合环保要求，带回
收标识丝印，且要求增加条码规范管控
The PE bag of the remote control
must meet environmental
requirements, with recycled marking
silk screen, and requires increased
barcode regulation control
4.3.8
RoHS
RoHS 检测应符合环保要求。(例行试验)
RoHS detection should meet
environmental requirements.
(Routine tests)