Specifications

18
Quick Start (for Grip Mode)
1. Connect the Equipment
a. Connect the Cygnus to a mounting pipe with a C-clamp.
b. Connect the safety cable to the mounting pipe.
c. Connect to AC power (100 – 240 VAC 50/60Hz)
d. Connect other slave Cygnus’s by daisy chaining DMX cable starting
from the first units DMX output.
2. Enter Grip Mode
a. Press and hold the leftmost two buttons.
b. ‘GrP’ will be displayed for 1 second. If ‘nor’ is displayed then the unit
is in normal mode. If so, repeat this step.
c. The current dimmer value will be displayed as a value 0-100.
d. Daisy chained slave units will display ‘SLA’.
3. Set the Dimmer Value
a. Press the left set of ‘-’ or ‘+’ buttons to change the value.
4. Set the Color Temperature
a. Press the right set of ‘-’ or ‘+’ buttons to change the value. The range is
28-60 for color temps 2800-6000K. A ‘C’ is displayed before the
value, ex. ‘C35’ for 3500K.
5. Exit Grip Mode
a. Press and hold the leftmost two buttons.
b. ‘nor’ will be displayed for 1 second for normal mode.
c. The current DMX address will be displayed.