Installation Guide

COMPLETE BATHTUB
INSTALLATION
20. Fill the tub with water to the overflow and
then drain the tub while inspecting the
waste connections below the floor for leaks.
Access from below will be necessary for this
step (figure 14).
21. With the bathtub now in place, wipe off any
excess tub and tile caulk and adhesive where
the tub meets the floor.
22. Run a bead of tub and tile caulk around the
bottom edge of the bathtub where it meets
the floor. Wipe off any excess caulk with a
wet cloth (figure 15).
figure 14
figure 15
FREESTANDING INSTALLATION