Instructions / Assembly

WC-AT102340P11

All information is based on the latest product information available at the time of publication. Product

characteristics, packaging, and availability may change at any time without notice.

Installers, please keep these instructions for the consumer. They contain important information.

ATTENTION

The cartridges in the main body have been tested and adjusted by the factory.

Do not take the cartridges apart.

A platform may be built by the installer. No platform is included.

Clean the water supply pipe before installing to avoid jamming.

Connect the hot water supply on the left and the cold water supply on the right.

Flow pressure: Min: 0.05MPa Max: 1.60MPa

Recommended pressure: 0.1MPa to 0.8MPa (1 to 8 bar)

TO KEEP THE FAUCET LOOKING BEAUTIFUL

FOLLOW THESE SIMPLE CARE INSTRUCTIONS REGULARLY

Rinse the faucet clean with clean water.

Do not use any cleaning agents containing abrasive or coated abrasive ingredients.

Do not use any cleaning agents containing acids, polish abrasives, or harsh cleaner or soaps.

IF HEAVY CLEANING IS REQUIRED, THE FOLLOWING

PROCEDURES ARE RECOMMENDED

Clean the faucet with water.

Remove tough surface lm and build-up with soft liquid cleaning agents, clear liquid glass

cleaners, non-acidic, non-abrasive gentle liquid, fully dissolved powder cleansers mixed

according to manufactures directions, or non-abrasive liquid polishers.

After cleaning, make sure to rinse suciently with clean water in order to completely remove

any remaining cleanser and dry with a soft cotton cloth.



