Installation Guide

WC-R4300-72-DBL

RESIN INSTALLATION GUIDE

Parts List

12B 12C 4D

Mark the position of the screw holes on the wall by

measuring the space between the centers of the

mounting brackets on the back of the vanity.

Vertical position (X) is decided by the purchaser -

remember to mark low enough to accommodate

the sink on the top of the vanity counter or it

will be too high when installed. Use a spirit level

to ensure the screws holes are horizontal.

Mark the screw position

Diameter 6mm

Depth 40 mm

Draw horizontal line

Tools List

(Tools not included)

Electric drill

Drill bit

(Ø8)

Pencil Screwdriver

Silicone Tape measure

Spirit Level

• Prior to installation, please check recieved

items against the “Parts List”.

Please report any missing items to your

retailer immediately.

• Protect all surfaces from sharp objects,

high heat sources, direct prolonged

sunlight and chemical hazards.

• Professional installation recommended.

1 Integrated Countertop and Sink

1 or 2 Mirrors

2 per mirror 2 per mirror

PAGE 1
Tools List (Tools not included) • Prior to installation, please check recieved items against the “Parts List”. Please report any missing items to your retailer immediately. • Protect all surfaces from sharp objects, high heat sources, direct prolonged sunlight and chemical hazards. • Professional installation recommended.
PAGE 2
Insert the anchor into the screw hole for reinforcement. 3 Attach vanity to wall by lowering onto the mounting brackets wall 12C 12B 4D 4 Adjust the mounting attachment as required 5 Adjust hinges as required.
PAGE 3
6 8 Use a spirit level to ensure the vanity is level left to right. Adjust if needed. 7 9 Attach counter to cabinet with silicone sealant applied to top of front and side cabinet edges. Do not over-apply. Allow to dry for 24 hours for proper curing. Use a spirit level to ensure the vanity is front to back. Adjust if needed. Licensed professional installation is recommended.
PAGE 4
10 Mark screw position Draw horizontal line X Diameter 8mm Depth 40mm 12 11 2 2 WC-R4300-72-DBL RESIN INSTALLATION GUIDE