Installation Guide

WC-R4500-60-SGL

INSTALLATION-GUIDE

Prior to installation please check received

items against the “Packing List”.

Please report any missing items to your

retailer immediately.

Protect all surfaces from sharp objects,

high heat sources, direct prolonged

sunlight and chemical hazards.

Professional installation recommended.

●

PACKING LIST

REQUIRED TOOLS NOT IN BOX

INSTALLATION AND ADJUSTMENT OF HINGES (if required)

(Not all components may be included, depending on your purchase)

Sink / 1 Main cabinet / 1 58” Mirror / 1

Bracket / 2

Screw for vanity / 6

ape Measure

Pencil

Electric Drill

Phillips Screwdriver

Adjustable Wrench

Spirit Level

Silicone Sealant

remove adjust height adjust laterally adjust depth

install

PAGE 1
● ● ● Prior to installation please check received items against the “Packing List”. Please report any missing items to your retailer immediately. Protect all surfaces from sharp objects, high heat sources, direct prolonged sunlight and chemical hazards. Professional installation recommended.
PAGE 2
INSTALLATION INSTRUCTIONS 1 Mark the position of the screw holes on the wall by measuring the space between the centers of the mounting brackets on the back of the vanity. Vertical position (X) is decided by the purchaser. Remember to mark low enough to accommodate the sink on the top of the top of the vanity counter or it will be too high when installed. Use a spirit level to ensure the screw holes are horizontal. 2 Attach the bracket by screwing into a wall stud for reinforcement.
PAGE 3
6 Licensed professional installation recommended. These instructions are for mounting into studs or other in wall reinforcement, drywall alone is not sufficient to support wall hung vanities. Other installation techniques may require a licensed professional. 7 Install the mirror: use a pencil to mark the placement of the screw holes on the wall, drill the holes and insert the plastic wall anchors.