Installation Guide

WC-1414-60 Double

Installation Guide

Prior to installation please check received

Please report any missing items to your

Protect all surfaces from sharp objects,

high heat sources, direct prolonged

sunlight and chemical hazards.

Professionalinstallationrecommended.

●

items against the "Packing List".

retailer immediately .

REQUIRED TOOLS NOT IN BOX

Tape measure

Pencil

Electric Drill

Phillips Screwdriver

Adjustable Wrench

Spirit Level

Silicone sealant

adjust laterally

adjust depth

adjust height

Counter & sink / 1

PACKING LIST

Main cabinet / 1

Screws for mirror / 4

Mirror / 2 (may not be

included)

(Not all components may be included,depending upon your purchase)

HOW TO ADJUST HINGES (if required)

PAGE 1
● ● ● Prior to installation please check received items against the " Packing List". Please report any missing items to your retailer immediately . Protect all surfaces from sharp objects, high heat sources, direct prolonged sunlight and chemical hazards. Professionalinstallationrecommended.
PAGE 2
INSTALLATION INSTRUCTIONS Cut hole in back of cabinet 1 Installer must cut appropriately sized hole in back of cabinet to accommodate existing placement of hot & cold wall valves and drains. 3 Install the counter. Seal around the top of the cabinet with clear silicone sealant. 2 Adjust the feet if needed. (1) (2) 6-8mm (3) 4 Install the mirror: use a pencil to mark the placement of the screw holes on the wall , drill the holes and insert the plastic wall anchors.