Installation Guide

(for one sink)

SUGGESTED TOOLS AND MATERIALS

SINK INSTALLATION

PARTS / HARDWARE INCLUDED

Channel Lock

Silicone sealant

Tape Measure Safety Glasses

4x 4x 4x

4x 4x

A B C D E F

Turn the countertop upside down and place it on a clean surface. Place the hardware into

the 4 holes, in the same order that is shown above.

Using the channel lock, tighten in the

screws into each location. Do not over-

tighten.

Apply a continuous bead of quality silicone

sealant to the top surface (rim) of the sink.

Do not over apply.

10'

PAGE 1
SUGGESTED TOOLS AND MATERIALS 10' Silicone sealant Channel Lock Tape Measure PARTS / HARDWARE INCLUDED (for one sink) A B C 4x 4x 4x Safety Glasses D E F 4x 4x 4x SINK INSTALLATION A C B D 1 Turn the countertop upside down and place it on a clean surface. Place the hardware into the 4 holes, in the same order that is shown above. 2 Using the channel lock, tighten in the screws into each location. Do not overtighten.
PAGE 2
F 4 Turn the sink upside down and place it on a clean surface. Center the sink over the cutout. B E 5 Secure the sink to each of the four corners, using the remaining mounting kit and hardware provided. Do not overtighten. 6 Please allow 24 hrs. for the silicone sealant to properly cure, prior to continued installation of quartz countertop.