Installation Guide

Diameter 5/16 in.
Depth 1-1/2 in.
Drill holes
(top and bottom)
Draw horizontal line
Electric drill
Drill bit Tape measure
Pencil
Screwdriver
Hammer
Stud Bolt
2-pieces
Screws
2-pieces
Wooden Cleat
1-piece
Measure positions on wall to reflect
predrilled holes located on wooden
cleat.
After holes are drilled, hammer in
the stud bolts into the holes. Then
line up wall cleat to match the
predrilled holes. Tighten cleat to wall
with screws.
Line up the cabinet according to the
cleat, now tightly fastened on the wall.
Make sure to place cabinet on top of
cleat until it is secured on the wall.
WC-2323-WC
INSTALLATION GUIDE