Installation Guide

WC-CG8000-48

OVERMOUNT INSTALLATION

INSTALLATION AND ADJUSTMENT OF HINGES

300m

PACKING LIST

Main Cabinet / 1 Counter / 1 Sink / 1 Mirror / 1

Installation screws

for mirror / 2

OPTIONAL OPTIONAL OPTIONAL

• Prior to installation, please check received items

against the “Packing List”.

• Please report any missing items to your retailer

immediately

• Protect all surfaces from sharp objects,

high heat sources, direct prolonged sunlight

and chemical hazards.

• Professional installation recommended.

PAGE 1
• Prior to installation, please check received items against the “Packing List”. • Please report any missing items to your retailer immediately • Protect all surfaces from sharp objects, high heat sources, direct prolonged sunlight and chemical hazards. • Professional installation recommended.
PAGE 2
INSTALLATION INSTRUCTIONS 1 Installer must cut appropriately sized hole in back of cabinet to accommodate existing placement of hot&cold wall valves and drains 2 Install the counter and pop-up drain. Seal around the top of cabinet with clear or white silicone sealant. 3 Install the sink and pop-up drain. Seal around the base of the sink with clear or white silicone sealant. 4 Attach mirror brackets to wall with supplied screws. Hang mirrors.