Instructions / Assembly

SUGGESTED TOOLS AND MATERIALS
1
SINK INSTALLATION
3
Sealant Tape Measure Safety Glasses
10'
CARE AND CLEANING
For best results in caring for your stone top, we suggest:
- Always wipe off spills immediately.
- Seal the stone top regularly with a good quality stone sealer.
- Never use strong / abrasive cleaner. Always test your cleaning solution on unnoticeable areas before applying to
the entire surface.
- Wipe surfaces clean, immediately after applying cleaner.
- Do not allow cleaner to sit or soak. Never let cleaners sit on the surface of the stone for long periods of time.
- Use a soft, dampened sponge and cloth. Never use an abrasive material such as brush or scouring pad to clean
surfaces. They will scratch the surface of the stone top and lavatory.
- Always rinse and wipe clean the fixtures to prevent soap buildup.
Apply a continuous bead of quality sealant
to the top surface (rim) of the sink.
Turn the stone top upside down and place it on a clean,
surface. Center the sink over the cutout.
2
PARTS / HARDWARE INCLUDED
4x
4x 4x
4x
hand tighten only
Secure the sink to the top using the mounting kit and hardware provided with the stone top.
Hand tighten only, do not use any tools.