Instruction manual

Technical Support: [e-mail] US: [phone] EU: [phone]
2
Contents
1. Introduction
CONTENTS AND INTRODUCTION
AMP-001-010 Wyrestorm HDBaseT
TM
Class D Digital
Audio Amplier / Receiver / Extender
The Wyrestorm AMP-001-010 is a unique HDBaseT
TM
Class D digital audio amplier with receiving and repeating
functionality that fundamentally changes the way to approach
the design of multi-room audio-visual systems.
Fully cascadable (daisy-chained) over multiple 70m/230ft
distances up to 7 times using a single Cat5e cable to create
larger distributions. It also offers HDMI/HDBaseT reception
and pass-thru, 2.1 audio amplication with subwoofer and
stereo preouts for connection to an AVR and HDMI breakout
with bidirectional control of source/display from either
location via IR/RS232.... and so much more.
Feature rich and highly versatile, the AMP simplies,
combines and improves the relationship between HDMI,
HDBaseT and stereo audio for integrators by incorporating
3:1 audio switching from centralized AV sources and ARC or
local audio input.
Introduction
Features
Safety Precautions
Package Contents
Panel Descriptions
i. Front
ii. Rear
EDID Management
i. About EDID
ii. Before EDID adjustment
iii. EDID Pre-sets
RS232 Application Scenarios
i. Understanding RS232 Connection & Signals
ii. Zonal IR for Cascading Multiple Independently
Controlled AMP units
iii. Global IR for Cascading Multiple Collectively controlled
AMP units
iv. Hybrid IR for combination of Zonal and Global IR
control of multiple AMP units
v. RS232 Addressing
vi. Routable RS232 with Wyrestorm POH-enabled
HDBaseT Matrices - MX-PP-POH
vii. Residential RS232 HDBaseT Addressing example
viii. Example system topology showing multiple, dierently
addressed amps.
ix. Commercial RS232 HDBaseT Addressing example
Specications
1
2
3
4
5
6
Basic Operation
8
Remote Control Handset Operation
9
Application Scenarios and installation benets
i. Basic Centralized Source
ii. Extended Centralized Source
iii. Basic Matrix
iv. Extended Matrix
v. AMP-001-010 as Display Receiver
vi. AMP-001-010 as In-line Solution
vii. Central Conguration
11
12
Onscreen User Interface
10
Connection and Operation
i. Cabling Guide
ii. RJ45 Termination
iii. Initial Connection
iv. IR/RS232 Control Connection
v. Optional Device Connection
- Personal Device Audio Input
- Speaker Connection
- Subwoofer
- External Power Amplier
- Supported Speaker Types
vi. Interface Device
7
Maintenance
FAQ’s
Troubleshooting
Provided Service
Mail In Service
Installation Notes
Warranty
i. Warranty Limits and Exclusions
15
16
14
17
13
18
19
20