Instruction manual

Technical Support: [e-mail] US: [phone] EU: [phone]
4
PACKAGE CONTENTS, SPECIFICATIONS AND PANEL DESCRIPTIONS
4. Package Contents
6i. Panel Description - Front
5. Specication
1 x AMP-001-010 HDBaseT Digital Amplier main unit
1 x Printed product manual
(also downloadable at www.wyrestorm.com)
1 x USB ash drive containing control software and digital
product manual
1 x 18v DC power supply
1 x IR TX transmitter
1 x IR RX receiver
1 x Remote control handset
2 x Installation brackets (recommended)
1x USB - Serial Cable (pheonix connector)
1
2
3
4
Amplied passive speaker output with spring terminal connections - Connecting minimum power handling of 25
Watts RMS per channel accepting 4, 6 or 8 Ohm impedance.
RS232 serial control port – for direct and local control of AMP through third party control systems or PC.
Software provided for connection to a control system - see www.wyrestorm.com for protocols for leading
Control Systems.
HDBaseT IN – HDBaseT input accepting full HD video, HD audio and control signals from centralized source
over a single Cat5e/6.
Analog Subwoofer Pre-out for external connection of active sub woofer accepting single Mono/LFE RCA Input.