Wyred 4 Sound mAMP mini-AMP Owner’s Manual **IMPORTANT** Check position of AC mains switch prior to connecting the unit to a power source. ©Wyred 4 Sound 2013 All rights reserved. v1.
Table of Contents Register Your Product 1 READ FIRST Important 1 Package Contents 1 Introduction 2 Design and Feature Overview 2-3 AC Mains Voltage Switch 3 Getting Connected 4 Powering your Integrated Amplifier 4 “Break-In” Period 4 RCA/XLR Input Select 5 DC Trigger 5 Back Panel Diagram 6 Troubleshooting 6-7 Got Hum? 7-8 Warranty Coverage 8-9 Service 10 Specifications 11
Register Your Product! It is very important to complete the warranty registration form located on our website. You MUST complete and submit the form within 30 days of purchase to activate your warranty. When you navigate to our website there is a tab called “Register Products” that will allow you to fill out and submit the form. **Keep your packaging! It is custom made for your unit and will effectively protect it for possible future use.
Introduction The transparent nature of a Wyred 4 Sound product reproduces your favorite recording with an abundance of detail and transparency. The circuits are carefully designed and built with premium grade components to produce optimum performance. Nothing is better than having neutral power behind your music! We understand that there are other products on the market which have similar features and internal parts.
sufficient control of your speaker to ensure tight bass as well as a powerful yet nimble sound stage. The mono-block form factor allows you to use a short speaker cable for each channel by placing the amp in near proximity to each speaker. A mono-block configuration can cut cost on speaker cable while improving the performance of your system. Another benefit of separate amps is the elimination of channel crosstalk which further improves the imaging and presence of a well designed product.
Getting connected CAUTION: Disconnect the power cord or put the power switch in the “off” position before making any connections to your amplifier to minimize the risk of electric shock and possible loudspeaker damage. Power your mAMP “on” after all final connections have been made. Each binding post is made of highly ductile “OFC” copper alloy. Both clamping nuts are built out of one piece, and offer an excellent grip.
RCA/XLR Input select The mini-Amplifier has both an RCA and XLR analog input. A balanced connection is recommended if your source components offer an XLR connection. A 2-position switch is located on the rear of the unit that selects either the RCA or XLR input. When the switch is in the “In Position” it will select the RCA input. If the switch is in the “out position” it will select the XLR input.
Back Panel Diagram 1. 2. 3. 4. 5. On/Off power switch Fuse holder and AC power input 120V/230V Mains Voltage selector switch Speaker output 12V DC Trigger: Used for turning the unit on from a standby state as well as triggering on equipment with a compatible trigger input. 6. XLR Analog input 7. RCA Analog input Troubleshooting -No sound? If you have your input source and speakers connected and you can’t get music to play, check the following.
5. If the input selection switch is in the proper position, you will need to check your source for sound output. Carefully check to see that you have the correct input selected and the cables plugged in securely. 6. If the input is in the proper position and you are confident that your source is sending a signal but have no sound, try inspecting or replacing the interconnects and speaker cables. 7.
better solution is a power strip with grounded and surge protected F-connectors that you can pass your cable or satellite signal through. Warranty coverage Wyred 4 Sound’s warranty obligations are limited to the terms set forth below: Wyred 4 Sound, as defined below, warrants this Wyred 4 Sound-branded hardware product against defects in materials and workmanship under normal use for a period of FIVE (5) YEARS from the date of retail purchase by the original end user purchaser ("Warranty Period").
TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, STATUTORY, EXPRESS OR IMPLIED. AS PERMITTED BY APPLICABLE LAW, WYRED 4 SOUND SPECIFICALLY DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, AND WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS.
Service In the unlikely event there is a problem with your Wyred 4 Sound component, please contact your dealer, distributor, or Wyred 4 Sound to discuss the problem before you return the component to our manufacturing facility for repair. Products shipped to the factory will be refused and returned freight collect if not accompanied by a Wyred 4 Sound Service Department issued return authorization number (RA Number).
Specifications Typical THD+N 8Ω (10W out) 0.002% Power Output 8Ω @ 0.2% THD+N Power Output 8Ω @ 1.0% THD+N 255W 277W Power Output 4Ω @ 0.2% THD+N Power Output 4Ω @ 1.0% THD+N 430W 462W Output Idle Noise Frequency Response 20Hz--20kHz Lower Bandwidth Balanced Input Impedance Unbalanced Input Impedance Dynamic Range Gain Sensitivity Output Impedance Min Load Max Output Current Idle power consumption Standby power Consumption < 125µV ± 0.2db 1.5Hz all loads 100k 100k 111db 30.5db 1.35V 0.018Ω 3Ω 30A 9.
Wyred 4 Sound PH: 805-466-9973 Fx: 805-462-8962 Email: support@wyred4sound.com pg.
