Wyred 4 Sound MC 7150 MC 7150 Owner’s Manual **IMPORTANT** Check position of AC mains switch prior to connecting the unit to a power source. ©Wyred 4 Sound 2013 All rights reserved. v1.
Table of Contents Register Your Product 1 READ FIRST Important 1 Package Contents 1 Introduction 2 Design and Feature Overview 2-3 AC Mains Voltage Switch 3 Getting Connected 3 Powering your Integrated Amplifier 4 “Break-In” Period 4 DC Trigger 4 Back Panel Diagram 5 Troubleshooting 5-6 Got Hum? 6 Warranty Coverage 7-8 Service 9 Specifications 10
Register Your Product! It is very important to complete the warranty registration form located on our website. You MUST complete and submit the form within 30 days of purchase to activate your warranty. When you navigate to our website there is a tab called “Register Products” that will allow you to fill out and submit the form. **Keep your packaging! It is custom made for your unit and will effectively protect it for possible future use.
Introduction Wyred 4 Sound amplifiers replicate recordings with superb precision and trueness. During the development process we carefully tune each of our products to represent the W4S sonic signature which is no easy task! To ensure that your amp is operating at 100% in all respects we use strict testing regiments with premium grade Audio Precision equipment. Look no further for the culmination of performance and efficiency.
available for the top cover which include clear (Silver) or black anodize. Finally, the steel chassis helps create a rigid foundation for mounting the components and adds ventilation assistance for passive cooling. AC Mains Voltage switch Located on the left side of the rear panel is an AC mains switch. The MC 7150 will need to be unplugged and powered down for at least 2 minutes before changing the 2 position slider switch.
Powering your amplifier In order to turn the main power of the MC 7150 on, the switch located on the rear must be in the “on” position. A green light surrounding the power button on the front will illuminate. There is a built in 2 second delay after initially turning the switch on in the rear of the unit before you can press the power button. Pressing the power button will turn the unit on from standby and the light around the power button will switch to blue.
Back Panel Diagram 1. 2. 3. 4. 5. 6. On/Off power switch Fuse holder and AC power input 120V/230V Mains Voltage selector switch RCA Analog input Speaker output 12V DC Trigger in Troubleshooting -No sound? If you have your input source and speakers connected, and you can’t get music to play, check the following. Feel free to test for output at any time during this process if you find and correct a potential problem. Always check the volume level before starting to play music.
7. Verify that the interconnects are working by replacing them with a different set from a connection that you know works. If these cables were used in the current setup and the only component that has changed is the MC 7150 continue to the next step. 8. Now that you have interconnects that you know work, try connecting the amplifier to another source and speakers that you know function properly.
Warranty coverage Wyred 4 Sound’s warranty obligations are limited to the terms set forth below: Wyred 4 Sound, as defined below, warrants this Wyred 4 Sound-branded hardware product against defects in materials and workmanship under normal use for a period of FIVE (5) YEARS from the date of retail purchase by the original end user purchaser ("Warranty Period").
WARRANTIES THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY AND TO REPAIR OR REPLACEMENT SERVICE AS DETERMINED BY WYRED 4 SOUND IN ITS SOLE DISCRETION EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE EXTENT PERMITTED BY LAW, WYRED 4 SOUND IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF
Service In the unlikely event there is a problem with your Wyred 4 Sound component, please contact your dealer, distributor, or Wyred 4 Sound to discuss the problem before you return the component for repair. Products shipped to the factory will be refused and returned freight collect if not accompanied by a Wyred 4 Sound issued return authorization number (RA Number).
Specifications Typical THD+N 8Ω (10W out) 0.003% Power Output 8Ω @ 0.2% THD+N (2 channels driven) Power Output 8Ω @ 1.0% THD+N (2 channels driven) 165W 180W Power Output 4Ω @ 0.2% THD+N (1 channel driven) Power Output 4Ω @ 1.0% THD+N (1 channel driven) 335W 364W Output Idle Noise A wt. Frequency Response 20Hz--20kHz (8 ohms) Unbalanced Input Impedance Dynamic Range Gain Sensitivity Min Load Idle power consumption Standby power consumption < 150µV ± 0.027db 61.9k 106db 30db 1.15V 4Ω <10W <0.
