mINT Mini-Integrated Owner’s Manual **IMPORTANT** Check position of voltage mains switch prior to connecting the unit to power.
Table of Contents READ FIRST Important 3 Package Contents 3 Introduction 3-4 Design and Feature Overview 4-5 AC Mains Voltage Switch 5 Getting Connected 5 Powering your Integrated Amplifier 6 “Break-In” Period 6 Front Panel Operation Aux 2 / Home Theater Bypass Fixed Out / Main In DC Trigger USB Configuration (MAC) USB Configuration (PC) 6-7 7 7-8 8 8-9 9-10 Back Panel Diagram 10 Troubleshooting 11 Got Hum? 11-12 Warranty Coverage 12-14 Service 14-15 Specifications 16 Page 2 of
Important Please read the entire manual before connecting this product to any existing components or power. This manual contains detailed information regarding the design, operation and features of the Wyred 4 Sound mINT. Damage due to misuse or improperly following instructions will not be covered under warranty. See “Warranty” for an in depth understanding of the warranty restrictions regarding this product.
the USA yet still offer value comparable to those produced in regions where manufacturing is much less costly. Aside from great sonic performance, build quality and customer service are on the top of our priority list. Design and Feature Overview The mINT chassis was designed around the internal components.
A ¼” headphone jack is machined into the left had side of the front panel. When a headphone plug is inserted into the jack it will mute the other outputs (other than the Fixed outputs) regardless of the input selected or volume level. The performance of the built-in headphone amp is nothing short of impressive. Independent power supplies for exceptionally low channel crosstalk, low noise and an abundance of dynamic range make for true hi fidelity headphone experience.
Powering your Integrated amplifier In order to turn the mINT on the switch located on the rear must be in the “on” position. After a couple of seconds the green light surrounding the power button on the front will illuminate. Pressing the power button will turn the unit on and the light around the power button will switch to blue.
speaker outputs or the headphone output. The volume knob has a position indicator and with one turn the mINT can be adjusted from minimum to maximum output. The LED brightness level can be adjusted by using the following procedure: 1. Put the unit in standby by pushing the power button located on the front panel. (Standby is indicated by a green illuminated ring light) 2. First press and hold the mute button in, and then power the unit on from standby by pressing the power button. 3.
of the crossover should then be routed to the Main In input on the mINT. The signal fed to the Main In input will then be fed to the amplifier. The Fixed Out feature is activated by selecting the “out position” on the 2 position switch. If fixed out is selected the mINT can be used for recording or to feed a signal to another system. The fixed out is 2.0V.
5. to select the mINT as the output device in programs such as iTunes, Amarra or BitPerfect. The last step is easy……Enjoy your music! USB Configuration (PC) You must first download the drivers which are required for asynchronous operation. They are available for download on the Wyred 4 Sound website (http://www.wyred4sound.com/downloads.html). The drivers can be emailed to you if necessary, request them by emailing support@wyred4sound.com. Please follow these steps to install the driver.
refer to http://www.wyred4sound.com/faq.html for a detailed J. River setup guide. 13. The last step is easy……Enjoy your music! Back Panel Diagram 1. Aux 1: Input for analog source. 2. Aux 2: Input for analog source or Home Theater bypass when switch “#6” is set to the in position. 3. Toslink: Optical input for a digital source such as a TV, DVD player, Sonos, Airport express, CD player, etc. 4. Asynchronous USB: USB input for streaming music from a Mac or PC computer. 5.
Troubleshooting No sound? If you have your input source and speakers connected, and you can’t get music to play, check the following. Feel free to test for output at any time during this process if you find and correct a potential problem. Always check the position of the volume knob before starting to play music. Damage to any equipment due to the volume being set to high is not covered under warranty. 1. Verify that the power cord is securely plugged into the wall and the mINT. 2.
disconnecting the inputs to the integrated amplifier. If the noise is still there when the inputs are disconnected, then your amplifier may need service. If the noise is not there when the inputs are disconnected, try putting a cheater plug (ground isolator) on one component at a time in order to locate the source of the ground loop. Once the source is located you can contact the manufacturer for further information regarding a solution.
EXCLUSIONS AND LIMITATIONS Wyred 4 Sound does not warrant that the operation of the product will be uninterrupted or error-free. Wyred 4 Sound is not responsible for damage arising from failure to follow instructions relating to the product's use.
Wyred 4 Sound Authorized Service Provider will help determine whether your product requires service and, if it does, will inform you how Wyred 4 Sound will provide it. Wyred 4 Sound or its Wyred 4 Sound Authorized Service Providers will provide warranty service on products that are tendered or presented for service during the Warranty Period, as permitted by law. You may be responsible for delivery and return shipping and handling charges if the product cannot be serviced in the country it is in.
was boxed in nonstandard packaging or if the original packaging was so damaged to the point it was unusable. If Wyred 4 Sound determines that new packaging is required, the owner will be notified before the product is returned. To purchase additional packaging, please contact your authorized Wyred 4 Sound dealer, distributor, or the Wyred 4 Sound Service Department for assistance.
Page 16 of 16
