Owner's manual

Configuration for MPaD or MPoD

-(MPaD is for iPad / MPoD is for iPhone or iTouch)

-If you are using an Andriod or Kindle product proceed to the section titled “Configuration

for Squeezebox Controller”.

-This application does not support internet radio or 3

party apps but does support gapless

playback and DSD.

1. Before connecting to your new Music Server it must be powered on and properly connected.

Refer to the section titled ”Getting Connected” for detailed instructions. The unit will take

roughly 2 minutes to boot and become available on your network after being powered on.

2. Download and install MPaD/MPoD application form the App Store. It will cost $2.99USD.

3. Open the application and select the “Target” icon located at the top of the screen.

4. Select “W4S Server” located under Discovered players.

5. Next select “W4S Server” and it will be added to your list of Configured players.

6. For the next step you will need to locate your Music Servers IP address. It will be listed next to

“W4S Server” in the Configured players list.

pg. 4