User Manual

ManualsBrandsWyrestorm ManualsHDBaseT Extender Sets4K UHD Extender Set with 2-Way PoH and Bidirectional IR & RS-232 (4K: 70m / 230ft │1080p: 100m / 328ft)

18Gbps 4K HDR HDBaseT Extender with

HDCP 2.2 and 2-way PoH

EX-70-H2 v2

Quickstart Guide

EX-70-H2 v2 Quickstart Guide | 190227

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

1 of 4

WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the

installation process.

Basic Wiring Diagram

IMPORTANT! Installation Requirements

• This product was released in 2 different versions which contain different

chassis designs and feature sets.

• See Identifying Product Versions for details.

• Visit the product page to download the latest rmware, document version,

additional documentation, and conguration tools.

• Read through the Wiring and Connections section for important wiring

guidelines before creating or choosing premade cables.

• While this product supports CEC, WyreStorm cannot guarantee

compatibility with all forms of CEC communication.

In the Box

1x EX-70-H2 v2 Transmitter

1x EX-70-H2 v2 Receiver

1x IR Emitter

1x IR Receiver

2x 3-pin Terminal Block

1x 18V DC 1A Power Supply (US/UK/EU)

4x Mounting Brackets (2x for TX | 2x for RX)

1x Quickstart Guide (this document)

HDMI

IR Emitter

IR Receiver

18V DC 1A

Power Supply

IR to Control System

CAB-IR-LINK (Sold Separately)

EX-70-H2 Transmitter (TX) EX-70-H2 Receiver (RX)

4K/UHD HDMI Source 4K/UHD HDMI Display

KEY

HDMI

HDBaseT Cat6/7

IR TX and RX

Power

HDBaseT

Cat5e/6/6a/7

Note: Extender set may be powered

by either the TX or RX. Only one

power supply is required.

Summary of content (4 pages)

PAGE 1
8Gbps 4K HDR HDBaseT Extender with HDCP 2.2 and 2-way PoH Quickstart Guide EX-70-H2 v2 WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation process. • • • • • IMPORTANT! Installation Requirements This product was released in 2 different versions which contain different chassis designs and feature sets. See Identifying Product Versions for details.
PAGE 2
Front Panel (TX/RX) Rear Panel (TX/RX) Power LED Solid: The receiver is powered On Off: The receiver is powered Off Status LED Flashing: The receiver is operating normally. Off: The receiver is Not operating normally. HDCP LED Solid: HDCP content is present. Flashing: HDCP content is not present. Off: No signal. LINK LED Solid: Link to receiver has been established. Flashing: Link to receiver has not been established. Copyright © 2019 WyreStorm Technologies | wyrestorm.
PAGE 3
Wiring and Connections WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in it’s entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment. .
PAGE 4
Specifications Transmitter Receiver Inputs 1x HDMI In: 19-pin type A 1x HDBT In: 8-pin RJ-45 Female Outputs 1x HDBT Out: 8-pin RJ-45 Female 1x HDMI Out: 19-pin type A Output Video Encoding HDBaseT Class A Encoding Data Rate 9.