User Guide

Transmitter (Front/Rear) Receiver (Front/Rear)
HDMI In
19-pin type A HDMI female
Supports HDMI and DVI/D with adapter
Power LED
Solid: The unit is powered On
Off: The unit is powered Off
Power In
5.5mm Screw Down Barrel Jack
Connect to the included 12V DC 2A power
supply to the transmitter. A power supply
is not required on the other end as it will be
powered using PoC.
Status LED
Flashing: The receiver is operating normally.
Off: The receiver is Not operating normally.
E
UTP Out
8-pin RJ-45 female
Connect the transmitters UTP OUT to
receivers UTP IN.
F
USB LED
Solid: USB linked
Flashing: USB data transmitting
Off: No USB device connected
G
USB (PC) Host
USB Type B female
Connection of USB Host device
HDMI Out
19-pin type A HDMI female
Supports HDMI and DVI/D with adapter
Power LED
Solid: The unit is powered On
Off: The unit is powered Off
Power In
5.5mm Screw Down Barrel Jack
Connect to the included 12V DC 2A power
supply to the transmitter. A power supply
is not required on the other end as it will be
powered using PoC.
Status LED
Flashing: The receiver is operating normally.
Off: The receiver is Not operating normally.
E
UTP In
8-pin RJ-45 female
Connect the transmitters UTP OUT to
receivers UTP IN.
F
USB LED
Solid: USB linked
Flashing: USB data transmitting
Off: No USB device connected
G
USB Device
2x USB Type A female
Connection of USB devices such as
keyboards and mice.
Copyright © 2020 WyreStorm Technologies | wyrestorm.com
EXP-EX-80-KVM Quickstart Guide | 200330
UK: [phone] | ROW: 844.280.WYRE (9973)
[e-mail]
2 of 4
A
B
C D E F G
A
B
C D E F G