Instruction manual

19
Technical Support: [e-mail] US: [phone] EU: [phone]
to attach the IP address to the system and the IP address
will change to a default factory serial number MX0606-PP
or MX0606_HE1 / MX0808-PP or MX0808_HE1
Device Name
Should you wish to change the name of your matrix from
the factory default, just right click on the serial number
and select ‘rename’ from the dropdown menu. Input the
new name and press
OK.
In some systems these settings can be accessed through
the included Netfinder.exe application. Click
to locate the device IP address.
On either system, when the device name/default factory
serial number appears, double click (or right click and
OPEN) and you will be directed to a web login page in
your internet browser.
Enter the default password of ten zeros
‘0000000000’ and click
to take you to the NETCTL matrix controller screen.
The layout of NET CTL includes an upper section to
allocate input sources to output with the selection
displayed on the left hand side.
Operation is the same as COM CTL – Inputs buttons 1-4
can be clicked to be selected per Output port.
Press the button to update your chosen matrix settings
into the left hand display and your selection to take effect.
TELNET Control
For TELNET Control, the matrix IP address is as follows:
19
Technical Support: [e-mail] US: [phone] EU: [phone]
ADVANCED OPERATION
If using for the first time, the program will automatically detect the
IP address being used, with the result displayed in the white area
beneath.
Should no result appear or if the system is unable to detect an IP
address automatically, press the
button to locate.
When the IP address appears, click
to attach the IP address to the system and the IP address
will change to a default factory serial number MX0606-PP or
MX0606_HE1 / MX0808-PP or MX0808_HE1
Device Name
Should you wish to change the name of your matrix from the
factory default, just right click on the serial number and select
‘rename’ from the dropdown menu. Input the new name and press
OK.
In some systems these settings can be accessed through the
included Netfinder.exe application. Click
to locate the device IP address.
Missing image
On either system, when the device name/default factory serial
number appears, double click (or right click and OPEN) and you
will be directed to a web login page in your internet browser.
Enter the default password of ten zeros
‘0000000000’
and click
to take you to the NETCTL matrix controller screen.
19
Technical Support: [e-mail] US: [phone] EU: [phone]
ADVANCED OPERATION
If using for the first time, the program will automatically detect the
IP address being used, with the result displayed in the white area
beneath.
Should no result appear or if the system is unable to detect an IP
address automatically, press the
button to locate.
When the IP address appears, click
to attach the IP address to the system and the IP address
will change to a default factory serial number MX0606-PP or
MX0606_HE1 / MX0808-PP or MX0808_HE1
Device Name
Should you wish to change the name of your matrix from the
factory default, just right click on the serial number and select
‘rename’ from the dropdown menu. Input the new name and press
OK.
In some systems these settings can be accessed through the
included Netfinder.exe application. Click
to locate the device IP address.
Missing image
On either system, when the device name/default factory serial
number appears, double click (or right click and OPEN) and you
will be directed to a web login page in your internet browser.
Enter the default password of ten zeros
‘0000000000’
and click
to take you to the NETCTL matrix controller screen.
ADVANCED OPERATION