Instruction manual

3
Technical Support: [e-mail] US: [phone] EU: [phone]
2. Features
3. Safety Precautions
FEATURES AND SAFETY PRECAUTIONS
• Class B HDBaseT technology for one-cable
transmissions of full HD 1080p video @60Hz, HD
multichannel audio, routed control and power up
to 70m/230ft, under perfect conditions
• HDBaseT more resistant to electrostatic interference
than conventional distribution
• (MX-0808-PP-POH) - factory congured with 8 standard
transmission cards: HDBaseT PoH out, mirrored HDMI
out and HDMI In
(MX-0808-PP-POH-CUSTOM) - selection of digital
and analogue card options for customisable modular
HDBaseT PoH congurations
• Full 3D Support frame packing (Blu-Ray) / stereoscopic
(satellite/cable)
• Bi-directional, wide range IR control of inputs/outputs
from source and display locations via discrete IR control
(30 KHz to 56 KHz frequency)
• Fully routable RS232 serial control allows central control
of all display devices connected to the matrix via
WyreStorm Enado and third party control systems
• PoH – power passed directly along Cat5e/6 cable up to
70m/230ft from the MX-PP-POH to all connected PoH-
enabled display receivers - no additional power required
at display location for PoH receivers
• Each output can be cascaded up to 7 times for even
larger distributions spanning 56 displays covering a
transmission distance of up to 1.2Km/ 0.74miles
• Matrix also cascadable up to 7 times (using a TX-
POH-020 HDMI pass-thru card) for the quick and easy
creation of very large arrays of up to 392 displays
• Conforms to IEEE-568B standards
• HDCP compliant with constant feed to prevent screen
drop-outs
• Reads, copies and manages EDID from connected
devices
• Fully compatible with market leading third party control
systems - full integration protocols available for AMX,
Control4, Crestron, Red Eye, Nevo, RTI, Control FX,
Savant, Bit Wise, Elan, g!, URC, WyreStorm Enado
• Choose from 5 switching methods – front panel
buttons, local IR, IR call-back, RS232 and LAN
• Remote control can also be learned into a universal
remote handset to allow the control of multiple devices
from one handset
• Compact 2U size
• Additional infrared extension port for longer IR
connections
• Including mounting brackets, IR receivers, IR
transmitters and remote control handset
NOTE: *Perfect transmission conditions denote cable run
is within specied distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength.
1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no
objects containing liquids are placed on the
apparatus, including cups, glasses and vases.
2. Do not place this unit in a conned space such as
enclosed shelving, cabinets or bookshelves.
Ensure the unit is adequately ventilated.
3. To prevent the risk of electric shock or re hazard
due to overheating, do not cover the unit or
obstruct ventilation openings with material,
newspaper, cardboard or anything that may restrict
airow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as ampliers or computers and
do not place near sources of naked ame.
5. Unplug apparatus from power supply during
lightening storms or when unused for long periods
of time.
6. Protect the power cable from being walked on,
pinched or restricted in any way, especially at plug
connections.
7. Only use attachments/accessories specied by the
manufacturer.
8. Units contain non-servicable parts - Refer all
servicing to qualied service personnel.
9. Attention Do Not Hotswap HDMI plugs or HDBaseT
connectors - Please insert and extract cables carefully
with the power SWITCHED OFF. Power is passed along
transmissions so connecting and disconnecting cables
while powered can result in damage to circuitry or
possible injury.
WARNING
To reduce the risk of re, electric shock
or product damage:
4
Technical Support: [e-mail] US: [phone] EU: [phone]
FEATURES AND SAFETY PRECAUTIONS
MX0404-QI
• Quick and easy installation – set up in seconds straight out of
the box.
• Simplied ports - Input: HDMI – Output: integrated RJ45
connectors for a single Cat5e/6/7 UTP cable to each display
point for ease of installation.
• Conforms to IEEE-568B standards
• Each HDMI port also supports DVI signals.
• Each Output port can be fed to multiple displays (cascaded).
• Enables up to 4 HDMI video/audio devices to be independently
switched through up to 4 HDMI displays or projectors for
uncompressed digital distribution.
• Each output able to show any connected source simultaneously
regardless of whether the input carries HDCP encryption.
• Rened for Custom Install and Home Theatre Installations.
• Reads and copies EDID from connected devices with additional
EDID configuration through customisable DIP switch settings if
necessary.
• 2k resolution supported.
• Fully 3D compatible – Frame sequential 3D (Blu-ray) and
interlaced stereoscopic 3D (satellite broadcasts etc.)
• Supports all high denition resolutions up to and including
1080p and standard video formats.
• RS232 port.
• Choose from 6 switching modes – infrared remote control, front
panel buttons, local IR, IR call-back, LAN and RS232.
• Simple switching remote control included, which can also be
learned into a universal remote handset to allow the control of
multiple devices from one handset.
• Fully compatible for integration with market leading control systems.
• 4 x IR 3.5mm mini-jack ports for each output to link IR from
control system to control display
• Additional infrared extension port for longer IR connections
• HDMI v.1.3
• Supports 24Bit Colour depth
• Signalling rate of 6.75 Gbps
• Pack comes complete with 1 x 4x4 Matrix with 19” rack
brackets, 4 x 40m IR receivers with mounting brackets, IR
receivers, emitters and a Matrix remote control handset.
Additional features included on the RX-1UTP-IR-40
• Transmits one-way signal together with the HDMI signal over a
single Cat5e/6/7 cable.
• Receivers capable of 1080p transmissions up to 40m (131ft)
under ideal conditions*
• For even greater control and ne tuning, each receiver features
a fully adjustable EQ distance range for optimising the
transmission signal.
2. Features
3. Safety Precautions
1. Do not expose this apparatus to rain, moisture, sprays,
drips or splashes and ensure that no objects containing
liquids are placed on the apparatus, including cups,
glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves. Ensure the
unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard due to
overheating, do not cover the unit or obstruct ventilation
openings with material, newspaper, cardboard or
anything that may restrict airflow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as amplifiers or computers and do
not place near sources of naked flame.
5. Unplug apparatus from power supply during lightening
storms or when unused for long periods of time.
6. Protect the power cable from being walked on, pinched
or restricted in any way, especially at plug connections.
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all servicing to
qualified service personnel.
WARNING
To reduce the risk of fire, electric shock
or product damage:
• Protection against ESD (electrostatic discharge) included within
the unit to further stabilise transmission.
• LED indications for clear power and video signal selection.
• 5v mains supply included but receivers may be powered through the
USB port of the display using Wyrestorm USB to 5v power adaptor)
• Fully cascadable to further lengthen transmission.
*NOTE: ideal conditions denote cable run is within
specified distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength. For longer transmission distances, RS232 control
and Ethernet pass-through, please see our full HDBaseT
or HDBT Lite range of matrices, transmitters, receivers and
extender sets.
USB to 5V Cable
Part Number
CAB-USB-5V