Instruction manual

12 Technical Support: [e-mail] US: [phone] EU: [phone]
RS232 CONTROL
Serial control of the matrix via RS232 enables third party
control systems to be integrated within a MX-0808-PP-
POH-4K system. The COMCTL software included with
this product communicates via serial to enable advanced
matrix features to be accessed, such as relaying system
status and additional control of matrix settings, including
full configuration of the matrix for optimum performance.
i) COM Control Software Home Screen
ii) Message Receive Window
The Message Receive window displays information
received from the matrix, such as messages regarding
firmware version and input/output selections.
Options in the Message R eceive window include:
Press to view the current condition of all output
ports.
Press to delete the previous received message.
iii) Send Message Window
In the Send Message window, messages can be sent to
the matrix as follows:
Enter serial commands for the matrix, such as one
of the instructions for outputs, bc + space (a space is
required following)
1
11. RS232 Control
1
4
2
5
3
15
16
16
16
17
17
17
18
6
7
9
11
141312
8
10
1 Set IP Address
2 EDID Settings
3 Advanced Settings
4 IR Settings
5 IR Matrix Settings
6 Matrix Firmware Upgrade
7 Message Receive Window
8 Matrix Status
9 Message Clear
10 Send Message Window
11 Send Message
12 COM Port Connect State
13 COM Port Select
14 Connect/Disconnect from Matrix
15 Output/Input Switch
16 Select Previously Saved Output State 1, 2 or 3
17 Save Current Output State 1, 2 or 3
18 Select All Outputs to One Input