Instruction manual

3Technical Support: [e-mail] US: [phone] EU: [phone]
2. Features
FEATURES AND SAFETY PRECAUTIONS
• Independent switching and control of UltraHD 4K or full HD
HDMI sources to 8 individual HDBaseT or HDMI outputs for a
total of 16 possible UltraHD 4K display outputs*
• Transmits 4K transmissions up to up to 70m/230ft and 1080p
HDBaseT transmissions up to 100m/328ft
• Supports UHD (3840) & DCI (4096) 2160p resolutions up to
30Hz
• 4K chroma sub-sampling color palette 4:2:2 @ 4K/24bit at
30Hz // 1080p/48bit Deep Color at 60Hz
• HDBaseT Class A with full 5-Play compliance for one-cable
transmissions of full HD 1080p video @60Hz, HD multichannel
audio, Ethernet, serial control and power up to 100m/328ft
under recommended conditions**
• Multichannel audio up to 7.1 including DTS Master HD & Dolby
TrueHD
• Full 3D up to 1080p @60Hz - frame packing (Blu-ray) &
stereoscopic (satellite/cable)
• HDMI 1.4b with 4Kx2K – 10m/33ft distance supported
(7m/23ft recommended)
• Flexible control options – front panel buttons, local IR, IR call-
back from remote locations, RS232, RS485 and LAN (Telnet and
Web GUI)
• Bidirectional, wide range IR control of inputs/outputs from
source and display locations via discrete IR control (30 KHz to
56 KHz frequency) with IR Code Edit function
• RS232 serial control with third party control integration (see
website for compatible systems)
• Additional infrared extension port for longer IR connections
• Remote control can be learned into a universal remote handset
to allow the control of multiple devices from one handset
• Supports Ethernet routing through matrix to any of the eight
HDBaseT receivers at display zones location for network
communication
• PoH – No mains supply required at display locations -
power passed from matrix within HDBaseT transmission to all
connected PoH-enabled receivers
• EDID management via DIP switches to read and copy EDID
from connected devices to aid communication and device
compatibility
• Outputs cascadable up to 7 times for even larger distributions
spanning 56 displays covering a transmission distance of up to
1.2Km/ 0.74miles
• Quick Sync™ technology for virtually instantaneous I/O
switching
• HDCP compliant with constant feed to prevent screen drop-
outs
• Conforms to IEEE-568B standards
• 2U chassis size
* HDMI mirror outputs require EXP-SCL-DAC-4K scalers
on each output for UHD 4K
** Recommended transmission conditions denote cable
run within specied distance range of product, no
electrical interference, the use of straight cable runs
with no bends or kinks and no patch panels or wall
outlets used. The presence of any of these factors may
compromise bandwidth and signal strength.
1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no
objects containing liquids are placed on the
apparatus, including cups, glasses and vases.
2. Do not place this unit in a conned space such as
enclosed shelving, cabinets or bookshelves.
Ensure the unit is adequately ventilated.
3. To prevent the risk of electric shock or re hazard
due to overheating, do not cover the unit or
obstruct ventilation openings with material,
newspaper, cardboard or anything that may restrict
airow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as ampliers or computers and
do not place near sources of naked ame.
5. Unplug apparatus from power supply during
lightening storms or when unused for long periods
of time.
6. Protect the power cable from being walked on,
pinched or restricted in any way, especially at plug
connections.
7. Only use attachments/accessories specied by the
manufacturer.
8. Units contain non-servicable parts - Refer all
servicing to qualied service personnel.
3. Safety Precautions
WARNING
To reduce the risk of re, electric shock
or product damage:
4
Technical Support: [e-mail] US: [phone] EU: [phone]
FEATURES AND SAFETY PRECAUTIONS
MX0404-QI
• Quick and easy installation – set up in seconds straight out of
the box.
• Simplied ports - Input: HDMI – Output: integrated RJ45
connectors for a single Cat5e/6/7 UTP cable to each display
point for ease of installation.
• Conforms to IEEE-568B standards
• Each HDMI port also supports DVI signals.
• Each Output port can be fed to multiple displays (cascaded).
• Enables up to 4 HDMI video/audio devices to be independently
switched through up to 4 HDMI displays or projectors for
uncompressed digital distribution.
• Each output able to show any connected source simultaneously
regardless of whether the input carries HDCP encryption.
• Rened for Custom Install and Home Theatre Installations.
• Reads and copies EDID from connected devices with additional
EDID configuration through customisable DIP switch settings if
necessary.
• 2k resolution supported.
• Fully 3D compatible – Frame sequential 3D (Blu-ray) and
interlaced stereoscopic 3D (satellite broadcasts etc.)
• Supports all high denition resolutions up to and including
1080p and standard video formats.
• RS232 port.
• Choose from 6 switching modes – infrared remote control, front
panel buttons, local IR, IR call-back, LAN and RS232.
• Simple switching remote control included, which can also be
learned into a universal remote handset to allow the control of
multiple devices from one handset.
• Fully compatible for integration with market leading control systems.
• 4 x IR 3.5mm mini-jack ports for each output to link IR from
control system to control display
• Additional infrared extension port for longer IR connections
• HDMI v.1.3
• Supports 24Bit Colour depth
• Signalling rate of 6.75 Gbps
• Pack comes complete with 1 x 4x4 Matrix with 19” rack
brackets, 4 x 40m IR receivers with mounting brackets, IR
receivers, emitters and a Matrix remote control handset.
Additional features included on the RX-1UTP-IR-40
• Transmits one-way signal together with the HDMI signal over a
single Cat5e/6/7 cable.
• Receivers capable of 1080p transmissions up to 40m (131ft)
under ideal conditions*
• For even greater control and ne tuning, each receiver features
a fully adjustable EQ distance range for optimising the
transmission signal.
2. Features
3. Safety Precautions
1. Do not expose this apparatus to rain, moisture, sprays,
drips or splashes and ensure that no objects containing
liquids are placed on the apparatus, including cups,
glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves. Ensure the
unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard due to
overheating, do not cover the unit or obstruct ventilation
openings with material, newspaper, cardboard or
anything that may restrict airflow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as amplifiers or computers and do
not place near sources of naked flame.
5. Unplug apparatus from power supply during lightening
storms or when unused for long periods of time.
6. Protect the power cable from being walked on, pinched
or restricted in any way, especially at plug connections.
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all servicing to
qualified service personnel.
WARNING
To reduce the risk of fire, electric shock
or product damage:
• Protection against ESD (electrostatic discharge) included within
the unit to further stabilise transmission.
• LED indications for clear power and video signal selection.
• 5v mains supply included but receivers may be powered through the
USB port of the display using Wyrestorm USB to 5v power adaptor)
• Fully cascadable to further lengthen transmission.
*NOTE: ideal conditions denote cable run is within
specified distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength. For longer transmission distances, RS232 control
and Ethernet pass-through, please see our full HDBaseT
or HDBT Lite range of matrices, transmitters, receivers and
extender sets.
USB to 5V Cable
Part Number
CAB-USB-5V
HDMI Cable Performance Guide
MX-0808-PP-POH-4K
0ft 328ft32ft 65ft 98ft 131ft 164ft 197ft 230ft 262ft 295ft
0m 100m
10m
20m 30m 40m 50m 60m 70m 80m 90m
4K Transmission HD Transmission