WyreStorm HDBaseT 4x4 HD Matrix with 4 x 70m HD Display Receivers Part Number MX-0404-PP-KIT WyreStorm Pro Plus HDBaseT Matrix Solutions 4 Input 4 Output Single Cable HD Matrix with 2-way IR Control & RS232 Instruction Manual Thank you for choosing this WyreStorm product. Please read these instructions carefully before installing to avoid complications later.
CONTENTS AND INTRODUCTION Contents 1 Introduction 2 Features 3 Safety Precautions 4 Package Contents 5 Specifications 6 Panel Display: i. Panel Description - Matrix ii. Panel Description - Receiver 7 Typical Application 8 Connection 9 Basic Operation i. Front Panel Control ii. Remote Control Operation and Battery Replacement iii. IR Extender Control iv. IR call-back of Matrix and Source Devices v.
brackets, 4 x 40m IR receivers with mounting brackets, IR receivers, emitters and a Matrix remote control handset. ADDITIONAL FEATURES ON RECEIVERS Additional features included on the RX-1UTP-IR-40 • Receivers automatically adjusts feedback, equalization • Transmits one-way signal together with the HDMI signal over a single Cat5e/6/7 cable. and amplification of signal for easy installation.
produces heat such as amplifiers or computers and do not place near sources of naked flame. Transmission distance PACKAGE CONTENTS AND SPECIFICATION 5. Unplug apparatus from power supply during lightening storms or when unused for long periods of time. 6. Protect the power cable from being walked on, pinched or restricted in any way, especially at plug connections.
Panel Description - Matrix PANEL DESCRIPTIONS - MATRIX 6i.
PANEL DESCRIPTIONS - RECEIVER 6ii.
Typical Application Output 01 Output 02 01 Output 03 01 Output 04 01 control system ir rx ir link cable RX-70-PP RX-70-PP RX-70-PP RX-70-PP Control System TPYICAL APPLICATION AND CONNECTION 7. POwer Key cat 5e/6 70m/230ft hdmi ir tx ir rx Satellite/CablE Blu-ray/DVD APPLE TV MEDIA SERVER rs232 Cat5e Wiring Guide The quality of termination for every RJ45 is essential. Poor terminations leads to intermittent performance and longer install times. 8.
CONNECTION 1 Connect your HDMI input sources (such as: HDDVD, PS3/XBOX360, satellite/cable, Blu-Ray etc.) to HDMI inputs 1 – 4 of the MATRIX. loss of picture and sound if connections become loose or strained, resulting in unnecessary service call backs. Attention Do Not Hotplug! - Please insert and 5 extract cables carefully with the power SWITCHED OFF. Connecting and disconnecting while the unit is powered can result in damage to circuitry.
Basic Operation Simply toggle through the input sources connected to the matrix by either pressing the left/right arrow buttons or buttons numbered 1 – 4 for each output. Front Panel Control IR Extender Control Basic switching of various source inputs to output displays can be achieved via the front panel control of the Matrix. Outputs are numbered 1 – 4 with an input select button to the left.
MX-0404-PP-KIT MX-0404-PP-KIT HDMI IR TX IR Path IR Path Display Receiver HDMI IR RX Receiver IR Path IR Path Display Receiver IR Receiver HDMI The IR call-back function can be turned on and off as required. See below Setting: To enable IR call-back press and hold OUTPUT 2 and OUTPUT 4 together for 3 seconds until the LED lights FLASH on OUTPUT 1 and OUTPUT 2. Call-back is now activated and control of the Matrix is now possible from remote locations.
2 At display end: Insert the IR receiver jack into the IR RX port of the display receiver balun, with the receivers themselves placed in clear view on or near the displays to receive an infrared signal from the remote handset used to control inputs. Insert the IR emitter jack into the IR TX port of the display receiver balun, ensuring that the emitter sensor is securely attached to infrared sensor window of the display.
ADVANCED OPERATION i. RS232 Control Should third party control be required, please see below for control system configuration and hex code input. The RS232 connection on the matrix is female DB9 Users can use a USB to RS232 cable or a direct male to female serial cable.
IR Matrix Operation as with remote control handset – select the chosen input to be displayed on each output by either clicking the left/right arrow buttons to scroll through inputs numerically, or pressing the input number 1-4. iii. LAN Control with SmartSet Gui The matrix can also be controlled via LAN over a network/ web browser using the supplied WyreStorm software or LAN protocols from third party companies, such as Control 4.
page to manually change name of your matrix to better reflect the model you have. ADVANCED OPERATION 4 Select the matrix and click on SET-UP. From here you can change settings on the network card - Network: Enable DHCP to set a static IP, etc. iv. EDID DIP Switch setting Distribution of HD signals through the matrix requires mutual communication or ‘handshake’ between source and display. If there is any disparity between the two, successful transmission becomes problematic.
In instances where a connected display is unable to achieve 1080p resolution (such as using older or cheaper models), this DIP setting will instruct the matrix to use embedded 1080i video and stereo audio to output a signal. AVR 7.1 Audio EDID COPY to Blu-ray source (AV Receiver copy) For users who wish to copy EDID from an AV Receiver with 7.1 channel audio to a specific input port containing a Blu-ray player, follow a variation on the instructions above: 1.
TROUBLESHOOTING 11. Troubleshooting Generally, the majority of HD distribution installation issues are either caused by minor connection errors, communication problems between devices, or when the transmission of high signal bandwidth is attempted using insufficient cable.
14) Blu-ray: Deep Colour – make sure Deep Colour is turned on in your Blu-ray settings and displays. 15) Blu-ray: Resolution – if a reduction of resolution to 720/1080i produces an image, cable issues such as interference, patch panels, wall outlets, stranded cable use or excessive cable length are likely restricting transmission of a full 1080p signal.
FAQ’S 5) UTP Termination Issues - swap cables over at both transmitter and receiver ends to see if control is established. If so, a possible re-termination of the cable could remedy the problem. 6) Are you using WyreStorm emitters and receivers? The use of third party products/magic eyes may not be compatible. Always use WyreStorm components included with your purchase or check compatibility of third party control systems with your WyreStorm dealer.
What about screens with different resolution capabilities? When sending a signal point to point a TV will communicate it’s capabilities to the source, then the source will output a suitable signal that compatible (i.e. 1080p Stereo audio). If you were to use a matrix switch with three 1080p screens and one 1080i screen, the resultant image would be 1080i across all screens. The matrix switches do not scale per output but instead negotiate with the source a signal that all screens are capable of supporting.
WARRANTY AND WARRANTY LIMITS & EXCLUSIONS 16i. Warranty Should you feel your product does not function adequately due to defects in materials or workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated below (starting from the original date of purchase) either: a) Repair the product with new or refurbished parts. or b) Replace it with a new or refurbished product. Limited warranty period: All WyreStorm products are covered by a 3 year PARTS and LABOUR warranty.
Installation Notes INSTALLATION NOTES 17. WyreStorm MX-0404-PP-KIT Installation Reference Log (INPUT) INPUT Input number on Matrix Source Location Source Details Source resolution & audio settings Cable Number 1 2 3 4 Technical Support: support@wyrestorm.
WyreStorm MX-0404-PP-KIT Installation Reference Log (OUTPUT) INSTALLATION NOTES OUTPUT Output number on Matrix Output Location Display Details Display Resolution & Audio Settings 1 2 3 4 22 Technical Support: support@wyrestorm.
INSTALLATION NOTES Technical Support: support@wyrestorm.
www.wyrestorm.com WyreStorm Offices US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 Unit 22, Ergo Business Park, Swindon, Wiltshire, SN3 3JW UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 WyreStorm Technical Support US: +86 6677 0053 UK:- +44 (0) 1793 238 338 Email: support@wyrestorm.com WyreStorm Technologies reserve the right to change specification or product dimensions at any time.