Instruction manual

16
Technical Support: [e-mail] US: [phone] EU: [phone]
1080p 5.1 Audio (using embedded
D-series EDID)
When set to this DIP position the matrix will
use embedded 1080p video with 5.1ch
Audio. After setting the DIP switch, reconnect and turn on
for EDID settings to take effect.
1080p 7.1ch Audio (using embedded
G-series EDID)
When set to this DIP position the matrix will
use embedded 1080p video with 7.1ch
Audio. After setting the DIP switch, reconnect and turn on
for EDID settings to take effect.
AVR 7.1 Audio EDID COPY to Blu-ray source (AV
Receiver copy)
For users who wish to copy EDID from an AV Receiver
with 7.1 channel audio to a specific input port containing
a Blu-ray player, follow a variation on the instructions
above:
1. Set the DIP switch to the above position with the matrix
in the OFF position.
2. Connect the AVR to your desired OUTPUT port on the
matrix (for example, OUTPUT 2)
3. Power ON the matrix and select your INPUT on the
AVR, making sure your chosen SOURCE is connected
to (for example, INPUT 3 – Blu-ray)
4. Press and hold the OUTPUT SELECT button for 3
seconds for the EDID data to be copied from OUTPUT
2 (AVR) to INPUT 3 (Blu-ray).
Remaining settings no function (reserved for future
updates)
2
Support 1080i stereo
TV2
Support 1080P stereo
Support 1080P7.1 Audio
AVR
TV1
2
Video: 1080i
Audio: stereo
TV2
Video: 1080i
Audio: stereo
Video: 1080i
Audio: stereo
AVR
Fix EDID
1080i-2CH
TV1
2
Video and Audio:
unsupported
TV2
Video: 1080P
Audio: unsupported
Video: 1080P
Audio: 7. 1
AVR
TV1
2
Video: unsupported
Audio: stereo
TV2
Video: 1080P
Audio: stereo
Video: 1080P
Audio: stereo
AVR
TV1
DIP: 001
Copy AVR’s
EDID
DIP: 001
Copy Tv1’s
EDID
OUTPUT
INPUT
RX-1UTP-IR-40 - EQ Distance Adjustment Settings
Occasionally, the installation environment, such as the
distance between source and display may be a factor in
the perfect transmission and reception of a signal.
In addition to the MX0404-QI LONG CABLE settings on
the Matrix DIP switch, the EX-1UTP-IR-40 RECEIVER
balun can be further fine tuned depending on the length of
Cat5e/6/7 cable used for optimum performance.
Attention Please ensure the balun is switched
OFF when changing the dial to desired distance
setting.
Changes become effective when turned back ON.
Position Functions
0 0-5m Transmission distance
1 5-10m Transmission distance
2 10-15m Transmission distance
3 15-12m Transmission distance
4 20-25m Transmission distance
5 25-30m Transmission distance
6 30-35m Transmission distance
7
(default)
35-40m Transmission distance. Default position 7 recommended
for initial connection and operation. If signal requires ne-tuning,
move through the following settings until desired image quality is
achieved.
8 to F No function - settings reserved for future updates
HDMI OUT
DISTANCE
EQ
MIN
MAX
DISTANCE
EQ
MIN
MAX
HDMI OUT
HDMI OUT
DISTANCE
EQ
MIN
MAX
EDID
EQ
MIN
MAX
HDMI IN
0
1
2
3
4
5
6
7
TRANSMITTER
RECEIVER
P/N: RX-QI-IR -40
HDMI OUTDIS TANC E
EQ
MAX
MIN
ADVANCED OPERATION