User Manual

1x4 or 1x8 4K HDMI Splitter
with HDCP 2.2 Encryption
SP-0104-H2 | SP-0108-H2
Quickstart Guide
In the Box
1x SP-0104-H2 or SP-0108-H2 Splitter
1x 12V DC 1A Power Supply
1x 3-pin Screw Down Phoenix Connector
2x Mounting Brackets
1x Quickstart Guide
Basic Wiring Diagram
KEY
HDMI
Power
12V DC 1A
Power Supply
UHD Display
UHD Display UHD Display
UHD Display
HDMI to
display
HDMI to
display
UHD Source
HDMI to
display
IMPORTANT!
Do not connect or disconnect (hot plug) the HDMI connections while
the splitter is powered on. Doing so may cause damage to the units or
connected devices.
Additional Information
This Quickstart Guide provides the basic steps for the common uses of
this product. Refer to the Installation Guide and other documentation on
the product page for additional information.
Before Beginning
• WyreStorm recommends visiting the product page before installing
this product for updates to this Quickstart Guide as well as other
information about the product.
• Verify that all items are included in the packaging per the In the Box
list.
Installation
1. Connect an HDMI source to the HDMI In on the splitter using an
HDMI cable from a high quality brand such as WyreStorm Express.
2. Connect HDTV displays to Output 1 using an HDMI cable from a
high quality brand such as WyreStorm Express.
3. Repeat step 2 for additional displays or additional splitters.
4. Connect the included 12V DC 1A power supply to the DC 12V jack.
5. Congure EDIDs per the EDID Settings section.
Copyright © 2015 WyreStorm Technologies | wyrestorm.com
SP-0104-H2 | SP-0108-H2 Quickstart Guide | 151023
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
[e-mail]
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the
installation process.
Pure HDMI 1x4 or 1x8 splitter with support for full 4K resolutions and HDCP 2.2.