User Manual

Front Panel

Rear Panel

Input LED

Solid: HDMI source is connected and powered On.

Off: HDMI source is not connected or is powered Off.

Output LEDs

SP-0104-H2: 1-4 | SP-108-H2: 1-8

Solid: Display is connected and powered On.

Off: Display is not connected or is powered Off.

Power LED

Solid: The splitter is powered On

Off: The splitter is powered Off

Power In

5.5mm Male Barrel Jack

Connect to the included 100~240V AC 50/60Hz power supply.

HDMI Outputs

19-pin type A HDMI female:

SP-0104-H2: 1-4 | SP-108-H2: 1-8

Supports HDMI and DVI/D (requires adapter-not included). Limited to 600MHz pixel clock.

Input

19-pin type A HDMI female:

Supports HDMI and DVI/D (requires adapter-not included). Limited to 600MHz pixel clock.

EDID

Rotary Dial

Used to set EDIDs to correct resolution conflicts between the source and the display.

See EDID Settings.

RS-232

3-pin Screw Down Phoenix Connector

Used to update rmware on the SP-0104-H2. See RS-232 Wiring.

SP-0104-H2 | SP-0108-H2 Quickstart Guide | 151023

North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343

support@wyrestorm.com

2 of 4