1 Input to 2 HDMI Output Switcher & Scaler Part Number SW-1102 Wyrestorm AV Switcher Solutions Instruction Manual Thank you for choosing this Wyrestorm product. Please read these instructions carefully before installing to avoid complications later.
CONTENTS AND INTRODUCTION Contents 1 Introduction 2 Features 3 Safety Precautions 4 Packaging Contents 5 Panel Descriptions I. Front II. Rear 1. Introduction Retrofit installations can be complex and difficult to manage due to customer requirements for multiple devices of numerous digital or analog formats to be connected to HDMI outputs. Wyrestorm Switchers and Scalers overcome that problem by providing multi-format plug and play solutions to get you connected quickly and easily.
2. Features • Fully 3D compatible – Frame sequential 3D (Blu-ray) and • 2k resolution supported. interlaced stereoscopic 3D (satellite broadcasts etc.) extender sets. 3. 3. Safety Precautions Safety Precautions FEATURES AND SAFETY PRECAUTIONS • Reads and copies EDID from connected devices with additional EDID configuration through customisable DIP switch settings if necessary. • Supports all high definition resolutions up to and including SW-1102 1080p and standard video formats.
PACkAGE CONTENTS AND PANEL DESCRIPTION 4. • • • • • Package Contents Main unit. Wyrestorm SW-1102 Switcher & Scaler 5vDC mains power supply 1x remote control handset (Battery type: CR2025 3V). Product Manual - Printed and digital copies (digital copy also downloadable from website) IR Extension cable 5i.
Panel Description Rear 7 1 2 3 4 5 6 8 10 9 11 12 13 PANEL DESCRIPTIONS 5ii. 15 14 16 17 1 Composite AV inputs 1 & 2 9 2 Composite AV 1 & 2 stereo audio input (L/R) 10 HDMI Inputs 1-4 3 VGA input 11 HDMI input including 5.
IR REMOTE 6. IR Remote 1 STANDBY: press to enter and exit standby mode. 2 INFO: view input and output messages from the SW-1102 3 INPUT SOURCE: press for direct selection of specific input source. 4 UP/DOWN: Scroll numerically through inputs. 5 UP/DOWN/LEFT/RIGHT: UP/DOWN to move highlighter bar to desired parameter in On-Screen Menu (OSM) menu. Press LEFT/RIGHT to increase/decrease setting value of selected parameters.
ON-SCREEN MENU AND INPUT/OUTPUT FORMAT 7. On-Screen Menu 8. Input/Output Format Technical Support: support@wyrestorm.
CONNECTION & OPERATION AND TYPICAL APPLICATION 9. Connection & Operation 10. Typical Application 1 Connect your multi-format digital or analog AV input sources to the SW-1102 Switcher and Scaler, ensuring device format, cables and connectors are supported by the unit and suitable for the chosen port. Satellite/Cable Key: HDMI HDMI Cat5e Comp 2 Using good quality HDMI cables no longer than 15m/49ft in length, connect the SW-1102 to HDMI output devices ( such as HD-LCD display or HD-DLP).
Specification 12. IR Extender Control SPECIFICATION, IR EXTENDER CONTROL AND RS232 REMOTE CONTROL 11. Users can use the included IR receiver cable to change the IR receiver position should IR signals become obstructed by the location of the unit (such as positioned in a rack or cupboard). 13. If controlling the SW-1102 through the 35mm (1/8”) input jack on the rear panel, connect the IR cable directly to the IR EXT port.
MAINTENANCE, PRODUCT SERVICES, MAIL-IN-SERVICE AND WARRANTY 14. Maintenance Clean this unit with a soft, dry cloth only. Never use alcohol, paint thinner or other harsh chemicals. 15. Product Services Provided Service: 1. Damage requiring service: This unit should be serviced by a qualified service personnel if: • The DC power supply or AC adaptor has been damaged. • Objects or liquid have gotten into the unit. • The unit has been exposed to rain.
MAINTENANCE, PRODUCT SERVICES, MAIL-IN-SERVICE AND WARRANTY 2. There are no express warranties except as listed under “limited warranty coverage.” The warrantor is not liable for incidental or consequential damage resulting from the use of this product or arising out of any breach of this warranty.
www.wyrestorm.com WyreStorm Offices US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 Unit 22, Ergo Business Park, Swindon, Wiltshire, SN3 3JW UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 WyreStorm Technical Support US: +86 6677 0053 UK:- +44 (0) 1793 238 338 Email: support@wyrestorm.com We reserve the right to change specification or product dimensions at any time.