Instruction manual

8
Technical Support: [e-mail] US: [phone] EU: [phone]
CONNECTION & OPERATION AND TYPICAL APPLICATION
9. Connection & Operation
Connect your multi-format digital or analog AV input
sources to the SW-1102 Switcher and Scaler, ensuring
device format, cables and connectors are supported by
the unit and suitable for the chosen port.
Using good quality HDMI cables no longer than
15m/49ft in length, connect the SW-1102 to HDMI output
devices ( such as HD-LCD display or HD-DLP).
Power on sources to be used – we recommend
keeping unused inputs switched off so as not to interfere
with normal display.
Connect the SW-1102 to the power supply included
and choose your display output.
Select sources by using the input selector (turning
left or right) on the front panel or the remote handset.
NOTE VGA and AV2 share the same L/R audio input,
S-video and YPBPR2 share the same L/R audio.
Attention SW-1102 memory - when restarting
the unit, input/output selection will resume as per
previous selection.
Under bypass mode, when switching from VGA or
DVI-I to other inputs, the output will be set to 1080p.
Output will be set to 1080p when powered from
Bypass mode.
Bypass function is for VGA and DVI-I input s only.
Other than VESA, output will be automatically set to
1080p.
Attention Insert / Extract cables gently.
NOTE SW-1102 accepts AV, SV, VGA, YPBPR, DVI-I
and HDMI inputs.
1
2
3
4
5
10. Typical Application
Satellite/Cable
Blu-Ray/DVD
VHS Player
Desktop PC
Media Server
Blu-Ray/DVD
Satellite/Cable
Satellite/Cable
Scart
HDMI
Comp
VGA
Key:
HDMI
Cat5e
Comp
Scart
Yuv
Vga
VHS
YUV
Scart
HDMI
HDMI
Additional 3
inputs available
SW11-02