Model No: SW-1102 11 Input to 2 HDMI Output Switcher & Scaler Operating Instructions Thank you for purchasing this Wyrestorm product. Please read this instruction manual carefully before use.
Introduction With retrofit installations can be complex and difficult to manage due to, customer requirements for multiple devices to connect via single HDMI, with numerous formats and connections to be catered for. Wyrestorm Switchers and Scalers overcome that problem by providing multi-format plug and play solutions to get you connected quickly and easily.
The unit also automatically amplifies and equalizes signals to ensure the optimum HD transmission over the length of the HDMI cable without any loss in quality of picture or audio. Whatever the project requirements, if multiple formats, devices and connectors are an issue, Wyrestorm Switcher and Scaler products can provide the perfect “Get out of jail” solution.
Contents Introduction ........................................................................................ 2/3 Features ............................................................................................. 5/6 Safety Precautions ................................................................................ 7 Package Contents................................................................................. 8 Panel Descriptions (front) ............................................................
Product Overview – SW-1102 ■ Features Inputs supported: • 1 x VGA source • 1 xS-Video source • 2 x AV sources with stereo audio • 2 x YPbPr sources with analog audio 4 x HDMI sources (with one supporting 5.1 multichannel digital audio) 1 x DVI-I source with analog audio and digital audio via optical* • • *Should both analog and digital audio be connected, the digital audio has priority. Analog audio from the input is digitized and output to both the HDMI connection and the digital audio outs.
• • • • • • • • • DVI-I supports both analog and digital formats with L/R and optical audio input Detached audio output by L/R and optical Delivers uncompressed digital video with zero signal loss Supports high definition resolutions 1080p, 1080i, 720p and standard video formats Scales to 720p or 1080p Can by-pass scaling and output as source 10-bit triple-ADC for RGB/YPbPr Dual switching option: IR control with remote handset and manual front panel control Additional Remote control function with RS232 con
■ Safety Precautions Wyrestorm reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. Warning To reduce the risk of fire, electric shock or product damage: 1. Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects 6. Clean this apparatus only with dry cloth. filled with liquids, such as vases, shall be placed on the apparatus. 2. Do not install or place this unit 7.
■ Package Contents ① Main unit. Wyrestorm SW-1102 Switcher & Scaler ② 5vDC mains power supply ③ 1x remote control handset (Battery type: CR2025 3V). ④ Product Manual - Printed and digital copies (digital copy also downloadable from website) ⑤ IR Extension cable ■ Panel Descriptions Front 1. Inputs source LED indication numbered 1-11 2. Input selector – turn left or right to scroll through connected sources 3. Power standby 4.
Rear 1. Composite AV inputs 1 & 2 2. Composite AV 1 & 2 stereo audio input (L/R) 3. VGA input 4. S-Video input 5. Component YPbPr inputs 1 & 2 6. Component YPbPr 1 & 2 stereo audio input (L/R) 7. DVI-I input 8. Optical audio input 9. Stereo audio (L/R) 10. HDMI Inputs 1-4 11. HDMI input including 5.1 audio support 12. HDMI Output 1 &2 13. Analog audio output (L/R) 14. Optical audio output 15. IR Extension 16. 5vDC Power Input 17.
■ IR REMOTE ① STANDBY: press to enter and exit standby mode. ② INFO: view input and output messages from the SW-1102 ③ INPUT SOURCE: press for direct selection of specific input source. ④ UP/DOWN: Scroll numerically through inputs. ⑤ UP/DOWN/LEFT/RIGHT: UP/DOWN to move highlighter bar to desired parameter in On-Screen Menu (OSM) menu. Press LEFT/RIGHT to increase/decrease setting value of selected parameters.
■ (OSM) ON-SCREEN MENU PICTURE PC OSD Contrast 0~100 of contrast level Brightness 0~100 of bright level Saturation 0~100 of saturation level Sharpness 0~100 of sharpness level Hue 0~100 of sharpness level picture mode Standard/ dynamic/ soft /personal Scale Full/ overscan/ underscan/ letterbox/ panscan NR High/ mid /low/ auto/ off Reset Reset the above parameters to default factory settings.
■ INPUT/OUTPUT FORMAT INPUT AV/SV PAL, NTSC 480i, 480p, 576i, 576p, 720p@[50/60], 1080i@[50/60], YPBPR/HDMI 1080p@[50/60] 800x600@60, 1024x768@60, 1152x864@60, VGA/DVI(RGBHV) 1280 x768@60, 1280 x960@60, 1280x1024@60, 1440 x900@60, 1400 x1050@60, 1600 x1200@60, 800x600@60, 1024x768@60, 1280x1024@60, VESA-BYPASS 1280 x960@60, 1440 x900@60, 1600 x1200@60 OUTPUT AV/SV/YPBPR/HDMI/VGA/DVI 720p@[50/60] 1080p@[50/60] 800x600@60,1024x768@60,1280x1024@60, VESA-BYPASS 1280 x960@60,1440 x900@60,1600 x1200@60
display output. 5) Select sources by using the input selector or remote handset.– turn left or NOTE1: VGA and AV2 share the same L/R audio input, S-video and YPBPR2 share the same L/R audio. Attention 1. SW-1102 memory - when restarting the unit, input/output selection will resume as per previous selection. 2. Under bypass mode, when switching from VGA or DVI-I to other inputs, the output will be set to 1080p. 3. Output will be set to 1080p when powered from Bypass mode. 4.
■ Specifications Operating Temperature Range -5 to +35°C (-41 to +95 °F) Operating Humidity Range 5 to 90 % RH (no condensation) Input Video Signal 0.5-1.0 volts p-p Input DDC Signal 5 volts p-p (TTL) Output Video HDMI1.2 Maximum Transmission Distance <15m/49ft (If needed, HDMI extender is optional) Power Consumption 15wtts (Max.) Power Supply 5VDC Dimensions Mass (Main unit) 430mmW×48mmH×200mmD/16.9''W ×1.9''H×7.9''D 2.4kgs/5.
Users can use the included IR receiver cable to change the IR receiver position should IR signals become obstructed by the location of the unit (such as positioned in a rack or cupboard). If controlling the SW-1102 through the 1/8” (3.5 mm) input jack on the rear panel, connect the IR cable directly to the IR EXT port. ■ RS232 remote control.
■ Maintenance Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit.
provide a daytime phone and/or email address where you can be reached. If repair is needed during the limited warranty period the purchaser will be required to furnish a sales receipt/proof of purchase indicating date of purchase, amount paid and place of purchase. Customer will be charged for the repair of any unit received without such proof of purchase.
consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service Center or other Authorized Service, or damage that is attributable to acts of God. 2) There are no express warranties except as listed under “limited warranty coverage”. The warrantor is not liable for incidental or consequential damages resulting from the use of this product, or arising out of any breach of this warranty.
Thank you for your purchase. Please contact us with your questions or comments. US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 European Office: Unit 22, Ergo Business Park, Kelvin Road, Greenbridge, Swindon, SN3 3JW Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 Email: info@wyrestorm.com (North America) sales@wyrestorm.eu (ROTW) Website: www.wyrestorm.