Operating instructions

12
■ INPUT/OUTPUT FORMAT
 NOTE: RS485 port and LAN port are for matrix control. The LAN port is connected to
the computer via direct UTP and connected to the router via cross UTP.
■
Connection & Operation
1) Connect your multi-format digital or analog AV input sources to the
SW-1102 Switcher and Scaler, ensuring device format, cables and
connectors are supported by the unit and suitable for the chosen port.
2) Using good quality HDMI cables no longer than 15m/49ft in length,
connect the SW-1102 to HDMI output devices (
such as HD-LCD
display or HD-DLP).
3) Power on sources to be used – we recommend keeping unused inputs
switched off so as not to interfere with normal display.
4) Connect the SW-1102 to the power supply included and choose your
INPUT
AV/SV PAL, NTSC
YPBPR/HDMI
480i, 480p, 576i, 576p, 720p@[50/60], 1080i@[50/60],
1080p@[50/60]
VGA/DVI(RGBHV)
800x600@60, 1024x768@60, 1152x864@60,
1280 x768@60, 1280 x960@60, 1280x1024@60,
1440 x900@60, 1400 x1050@60, 1600 x1200@60,
VESA-BYPASS
800x600@60, 1024x768@60, 1280x1024@60,
1280 x960@60, 1440 x900@60, 1600 x1200@60
OUTPUT
AV/SV/YPBPR/HDMI/VGA/DVI 720p@[50/60] 1080p@[50/60]
VESA-BYPASS
800x600@60,1024x768@60,1280x1024@60,
1280 x960@60,1440 x900@60,1600 x1200@60