Specifications

Copyright © 2018 WyreStorm Technologies | wyrestorm.com
SW-0201-4K Specication Sheet | 180418
UK: [phone] | ROW: 844.280.WYRE (9973)
[e-mail]
1 of 2
2x1 HDMI/VGA Smart Switch with CEC Control
Specication Sheet
1x SW-0201-4K Smart Switch
1x 12V DC 0.5A Power Supply (US | EU | UK)
2x 3-pin Screw Down Phoenix Connector
1x 5-pin Screw Down Phoenix Connector
2x Mounting Brackets
1x Quickstart Guide
In the Box
The SW-0201-4K is a compact dual input device for manually or automatically switching a connected HDMI or VGA + audio source to a single HDMI output with
CEC-Link ensuring the display device is powered on during use.
No additional cabling is required other than a simple HDMI connection with manual control of source switching and CEC via push buttons on the front of the unit
or by using the contact closure points, which can be wired in-desk or to a wall plate.
Introduction
Key Features
• Provides automatic or manual switching of connected HDMI and VGA +
audio sources
• CEC Link allows for connected CEC compatible display devices to be
powered on automatically when source is in use
• Contact closure control via wired desk or wall plate for sources and CEC
allow for switcher to be installed out of sight
• Supports 4K content from HDMI sources and 1920x1200p from VGA
• Compact chassis can be desk-mounted for unobtrusive installation
• HDCP compliant
• Supports transmissions up to 4K@60Hz (HDMI)
• Supports HD resolutions up to 1920x1200 (VGA)
• Auto-switching transmitter detects and selects VGA (+audio) and HDMI
devices as soon as the source is connected
• Audio embed for VGA via 3.5mm jack
• RS-232 support for leading control systems including WyreStorm Enado
• Cable termination follows IEEE-568B standards
• LED indication for power supply to unit and source selection
• Threaded bushings allow use of both standard and locking DC power plugs
• Energy ecient universal power supply included
• Mounting brackets included
WyreStorm - Because the Technology Matters.
SW-0201-4K
Threaded bushing
for locking DC
power plug
Power LED
SW-0201-4K
Front
SW-0201-4K
Rear
HDMI Input from
Source Device
Source Selection
Switch and LED
CEC On/Off
Switch
VGA and Analog
Audio Input from
Source Device
HDMI Output to
Display Device
RS-232 Port for
connected device
control
Contact Closure for
link to Desk Plate
CEC Link
Connection to
Dsiplay Device
CEC Link
Function Switch
Automatic or
Manual Switching
Function Switch